From: Mark Brown Subject: PXA SSP - work in progress Date: Fri, 13 Mar 2009 14:37:24 +0000 Message-ID: <20090313143720.GC8989@sirena.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from cassiel.sirena.org.uk (cassiel.sirena.org.uk [80.68.93.111]) by alsa0.perex.cz (Postfix) with ESMTP id 923E21037FA for ; Fri, 13 Mar 2009 16:06:51 +0100 (CET) Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Daniel Mack , pHilipp Zabel Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org I worked a bit on the PXA SSP code last night and was able to come up with a configuration which uses non-network mode for I2S and works well on the Zylonite. I'll post the current series I have in a followup to this, if you could take a look that'd be great - I haven't yet worked through all the testing I'd like to do. Unfortunately it's going to have broken Daniel's configuration since I inverted the sense of LRCLK as the chip seemed not to generate an LRCLK with a non-zero frame delay; I need to check to see if this is just something I've overlooked. Hopefully Daniel's system should just have inverted the left and right channels. Having worked through non-network mode my feeling is that we should be able to come up with something that can figure out the extra clock cycles needed for Daniel's configuration with less of a special case. Non-network mode does seem like a better default than network mode because it avoids needing to look at the TDM configuration unless you want to use that.