From: Mike Frysinger Date: Sun, 29 Mar 2009 15:34:35 -0400 Subject: [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash In-Reply-To: <73839B4A0818E747864426270AC332C303E017D8@zmy16exm20.fsl.freescale.net> References: <1237171943-11938-1-git-send-email-Mingkai.hu@freescale.com> <200903160038.32390.vapier@gentoo.org> <73839B4A0818E747864426270AC332C303E017D8@zmy16exm20.fsl.freescale.net> Message-ID: <200903291534.36487.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 16 March 2009 02:23:50 Hu Mingkai-B21284 wrote: > From: Mike Frysinger [mailto:vapier at gentoo.org] > > On Sunday 15 March 2009 22:52:18 Mingkai Hu wrote: > > > Add MTD SPI Flash support for S25FL008A, S25FL016A, S25FL032A, > > > S25FL064A, S25FL128P. > > > > this doesnt really need to be part of this patch series and > > can be added all by itself > > > > > --- a/drivers/mtd/spi/Makefile > > > +++ b/drivers/mtd/spi/Makefile > > > @@ -28,6 +28,7 @@ LIB := $(obj)libspi_flash.a > > > COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o > > > COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o > > > COBJS-$(CONFIG_SPI_FLASH_STMICRO) += stmicro.o > > > +COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o > > > > this should be above stmicro -- keep it sorted > > > > also, the += is supposed to be indented with a tab, not spaces -mike > > Thanks, I'll fix it. can you post an updated spansion flash driver ? it can be merged independently of the eSPI patch series and it'd be good to get it merged sooner so i can push the sf patches without conflicts ... -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20090329/3dfabca6/attachment.pgp