From: Anton Vorontsov Subject: Re: [PATCH v4 2/4] NAND: FSL-UPM: Add wait flags to support board/chip specific delays Date: Tue, 31 Mar 2009 23:05:42 +0400 Message-ID: <20090331190542.GB23767@oksana.dev.rtsoft.ru> References: <20090330100241.346785618@denx.de> <20090330100555.111388782@denx.de> Reply-To: avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20090330100555.111388782-ynQEQJNshbs@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-mnsaURCQ41sdnm+yROfE0A@public.gmane.org Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-mnsaURCQ41sdnm+yROfE0A@public.gmane.org To: Wolfgang Grandegger Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Mon, Mar 30, 2009 at 12:02:43PM +0200, Wolfgang Grandegger wrote: > The NAND flash on the TQM8548_BE modules requires a short delay after > running the UPM pattern. The TQM8548_BE requires a further short delay > after writing out a buffer. Normally the R/B pin should be checked, but > it's not connected on the TQM8548_BE. The existing driver uses similar > fixed delay points. To manage these extra delays in a more general way, > I introduced the "fsl,ump-wait-flags" property allowing the board- > specific driver to specify various types of extra delay. > > Signed-off-by: Wolfgang Grandegger Acked-by: Anton Vorontsov