From: Mike Frysinger Date: Tue, 31 Mar 2009 19:48:14 -0400 Subject: [U-Boot] [PATCH] Added a tftp command In-Reply-To: <49D2A9EB.3090006@fearnside-systems.co.uk> References: <49D29CC5.2010406@fearnside-systems.co.uk> <200903311901.03029.vapier@gentoo.org> <49D2A9EB.3090006@fearnside-systems.co.uk> Message-ID: <200903311948.14937.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tuesday 31 March 2009 19:40:27 kevin.morfitt at fearnside-systems.co.uk wrote: > Mike Frysinger wrote: > > On Tuesday 31 March 2009 18:44:21 kevin.morfitt wrote: > >> Adds a "tftp" command that gets a specified file from a TFTP Server and > >> stores it in RAM at a specified RAM address. Most of the code already > >> exists in board-specific form (eg in board/hymod) but this patch > >> extracts it and makes it available as a standard u-boot command. > > > > your patch is horribly word wrapped. ignoring that, how is this any > > different from the "tftpboot" command ? i use "t " to load > > arbitrary files via tftp to arbitrary addresses all the time. > > "tftpboot" loads the file then if "autostart" is "yes" it automatically > boots from the load address. The patch just loads the file then stops. > When programming a board I use it to copy images across before I program > them into flash. In effect, it does the same thing as setting > "autostart" to "off" then using "tftpboot". so dont set autostart ? -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20090331/adf44aaa/attachment-0001.pgp