From: Wolfgang Denk Date: Wed, 01 Apr 2009 15:53:35 +0200 Subject: [U-Boot] Problem booting image + device tree (MPC5200B) In-Reply-To: References: Message-ID: <20090401135335.31A0F83797DC@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear "Nandini Hengen", In message you wrote: > > I currently have a problem with the device tree - the > kernel hangs after unpacking and trying to load the device tree. ... > U-Boot Version 1.2 incl. downloaded patches ... > combination with U-Boot 1.1.4). I also found a thread which recommended > using the newest U-Boot version and loading the dtb file using tftp into RAM > separately. Since then I've been using U-Boot 1.2. Until now non of the > kernel images generated seem to load (apart from the image the module was > originally shipped with) Rigth. The U-Boot versions you mntion are way too old to know about device tree handling. > I tried this using two phytec modules - both of which are non-functional at Well, and incorrect kernel will not render a board non-functional. > I'm currently wondering whether to send back the modules to Phytec or > compiling a different kernel and device tree would help. I recommend to get a recent version of U-Boot running. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The night sky over the planet Krikkit is the least interesting sight in the entire Universe. - Douglas Adams _Life, the Universe, and Everything_