From: Wolfgang Denk Date: Fri, 03 Apr 2009 23:15:01 +0200 Subject: [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 2/2 In-Reply-To: <49384735.jEywXLJ6P3fgT8HT%stefan.althoefer@web.de> References: <49384735.jEywXLJ6P3fgT8HT%stefan.althoefer@web.de> Message-ID: <20090403211501.856B983797DC@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Stefan Althoefer, In message <49384735.jEywXLJ6P3fgT8HT%stefan.althoefer@web.de> you wrote: > [PATCH] IXP425: Add new IXP425 board emPC-A400 > > This patch adds support for the emPC-A400 CPU board from > Janz Automationssysteme. It will also apply to some > of the Janz emVIEW displays which are based on this CPU > board. > > Besides of the board support, the patch includes > two features which are (up to now) private to this > port but might be of interrest to others. > > 1. Ability to download microcode to the NPE unit. This > code works without using the Intel Library (which > makes it smaller). This is good if you do not want > to do networking in u-boot, but want boot an NFS-rooted > linux system (where linux cannot load the microcode > by itself). > Refer to boards/empca400/cmd_npe.c > 2. Ability to boot the IXP425 Windows-CE kernel. Refer > to boards/empca400/cmd_bootce.c. Jean-Christophe says he has requested a cleaned up / rebased version from you; to you plan to submit one any time soon? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "I knew then (in 1970) that a 4-kbyte minicomputer would cost as much as a house. So I reasoned that after college, I'd have to live cheaply in an apartment and put all my money into owning a computer." - Apple co-founder Steve Wozniak, EE Times, June 6, 1988, pg 45