From: Mike Frysinger Date: Mon, 6 Apr 2009 06:16:21 -0400 Subject: [U-Boot] [PATCH] bin_dep.sh Support In-Reply-To: <73173D32E9439E4ABB5151606C3E19E250840309@SC-VEXCH1.marvell.com> References: <73173D32E9439E4ABB5151606C3E19E250840309@SC-VEXCH1.marvell.com> Message-ID: <200904060616.22994.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 06 April 2009 05:38:59 Prafulla Wadaskar wrote: > As a user ideally I expect u-boot.bin generated by u-boot make > should go onto flash and board should work. i disagree. u-boot.bin should be the exact flat binary of converting from the u-boot ELF file using objdump. > But if this doesn't work then how should we educate the uses and address > their questions whereas he might have stumped flashing wrong u-boot.bin to > his board...? yes. we havent had a problem in the Blackfin world with educating people. if the bootrom is used, then they have to use u-boot.ldr. if they're using an older Blackfin part and the one bootmode that supports direct execution (the part starts running at a hardcoded address), then and only then can they use u-boot.bin. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20090406/c3bde7fe/attachment.pgp