From: Steven Luo Date: Sun, 12 Apr 2009 02:57:54 -0700 Subject: [ath9k-devel] [PATCH] ath9k: reset after PCI FATAL/PERR interrupts Message-ID: <20090412095754.GA2594@steven676.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org From: Steven Luo ath9k_hw_getisr() doesn't appear to set anything in the status mask for PCI FATAL or PERR interrupts (AR_INTR_SYNC_HOST1_FATAL/PERR), which the open-source HAL seems to do. This means that the card isn't reset after these interrupts. This patch seems to fix a problem where the wireless drops out with an "ath9k: received PCI FATAL interrupt" in dmesg after some time; the hardware is an AR5416 in an ASUS WL-500W running 2.6.28.7 (OpenWRT) and compat-wireless 2009-03-31. Signed-off-by: Steven Luo --- --- a/drivers/net/wireless/ath9k/hw.c 2009-04-09 23:23:35.000000000 -0700 +++ b/drivers/net/wireless/ath9k/hw.c 2009-04-11 23:29:28.000000000 -0700 @@ -3007,6 +3007,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, DPRINTF(ah->ah_sc, ATH_DBG_ANY, "received PCI PERR interrupt\n"); } + *masked |= ATH9K_INT_FATAL; } if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) { DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,