From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 24 Apr 2009 23:26:38 +0200 Subject: [U-Boot] [PATCH 01/10] ZOOM2 Add initial support for Zoom2 In-Reply-To: <1239720063-20004-1-git-send-email-Tom.Rix@windriver.com> References: <1239720063-20004-1-git-send-email-Tom.Rix@windriver.com> Message-ID: <20090424212638.GA32292@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09:40 Tue 14 Apr , Tom Rix wrote: > Zoom2 is a new board from Texas Instruments and LogicPD > > The logicpd web site is a good source for general information on this board. > Please start looking here if the below links are broken. > http://www.logicpd.com > > This is a pdf of the product > http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf > This is the product description web page > http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp > > This patch provides a zoom2 base target by copying zoom1 and by making some > obvious changes. > > To configure, run > make omap3_zoom2_config > > Signed-off-by: Tom Rix > --- > MAINTAINERS | 4 + > MAKEALL | 1 + > Makefile | 3 + > board/omap3/common/Makefile | 1 + > board/omap3/zoom2/Makefile | 49 ++++++++ > board/omap3/zoom2/config.mk | 33 ++++++ > board/omap3/zoom2/u-boot.lds | 63 +++++++++++ > board/omap3/zoom2/zoom2.c | 76 +++++++++++++ > board/omap3/zoom2/zoom2.h | 151 +++++++++++++++++++++++++ > doc/README.omap3 | 13 ++ > include/configs/omap3_zoom2.h | 247 +++++++++++++++++++++++++++++++++++++++++ > 11 files changed, 641 insertions(+), 0 deletions(-) > create mode 100644 board/omap3/zoom2/Makefile > create mode 100644 board/omap3/zoom2/config.mk > create mode 100644 board/omap3/zoom2/u-boot.lds > create mode 100644 board/omap3/zoom2/zoom2.c > create mode 100644 board/omap3/zoom2/zoom2.h > create mode 100644 include/configs/omap3_zoom2.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 03d59b9..c2a4e33 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -611,6 +611,10 @@ Stelian Pop > at91sam9263ek ARM926EJS (AT91SAM9263 SoC) > at91sam9rlek ARM926EJS (AT91SAM9RL SoC) > > +Tom Rix > + > + omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC) > + > Stefan Roese > > ixdpg425 xscale > diff --git a/MAKEALL b/MAKEALL > index e4eb42b..c72e810 100755 > --- a/MAKEALL > +++ b/MAKEALL > @@ -561,6 +561,7 @@ LIST_ARM_CORTEX_A8=" \ > omap3_evm \ > omap3_pandora \ > omap3_zoom1 \ > + omap3_zoom2 \ > " > > ######################################################################### > diff --git a/Makefile b/Makefile > index e91c051..724ed51 100644 > --- a/Makefile > +++ b/Makefile > @@ -2980,6 +2980,9 @@ omap3_pandora_config : unconfig > omap3_zoom1_config : unconfig > @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 > > +omap3_zoom2_config : unconfig > + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3 > + > ######################################################################### > ## XScale Systems > ######################################################################### > diff --git a/board/omap3/common/Makefile b/board/omap3/common/Makefile > index 7b892fa..b8a0b14 100644 > --- a/board/omap3/common/Makefile > +++ b/board/omap3/common/Makefile > @@ -33,6 +33,7 @@ COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o > COBJS-$(CONFIG_OMAP3_OVERO) += power.o > COBJS-$(CONFIG_OMAP3_PANDORA) += power.o > COBJS-$(CONFIG_OMAP3_ZOOM1) += power.o > +COBJS-$(CONFIG_OMAP3_ZOOM2) += power.o how many CONFIG_X_BOARDS will we have? It's time to create a functionnality CONFIG_ (it can be done in an other patch but no other new board will be allow to do it) > > COBJS := $(COBJS-y) > SRCS := $(COBJS:.o=.c) > diff --git a/board/omap3/zoom2/Makefile b/board/omap3/zoom2/Makefile > new file mode 100644 > index 0000000..088b8cb > --- /dev/null > +++ b/board/omap3/zoom2/Makefile > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") > +OUTPUT_ARCH(arm) > +ENTRY(_start) > +SECTIONS > +{ > + . = 0x00000000; > + > + . = ALIGN(4); > + .text : > + { > + cpu/arm_cortexa8/start.o (.text) > + *(.text) > + } > + > + . = ALIGN(4); > + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } > + > + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > + __exidx_start = .; > + .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > + __exidx_end = .; as said precedently .ARM.extab & .ARM.exidx is not needed please remove > + > + . = ALIGN(4); > + .data : { *(.data) } > + > + . = ALIGN(4); > + .got : { *(.got) } > + > + __u_boot_cmd_start = .; > + .u_boot_cmd : { *(.u_boot_cmd) } > + __u_boot_cmd_end = .; > + > + . = ALIGN(4); > + __bss_start = .; > + .bss : { *(.bss) } > + _end = .; > +} > diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c > new file mode 100644 > index 0000000..0700c56 > --- /dev/null > +++ b/board/omap3/zoom2/zoom2.c > new file mode 100644 > index 0000000..08d2321 > --- /dev/null Best Regards, J.