From: Anton Vorontsov Subject: [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD Date: Fri, 1 May 2009 03:47:39 +0400 Message-ID: <20090430234739.GA27709@oksana.dev.rtsoft.ru> Reply-To: avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, Andrew Morton , David Brownell , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: Kumar Gala Return-path: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-spi.vger.kernel.org Hi all, Here are few patches that are needed to support spi-mmc slot on MPC8610HPCD PowerPC boards: [1/9] spi_mpc83xx: Handles other Freescale processors [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message [3/9] spi_mpc83xx: Add small delay after asserting chip-select line [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards The rest are cleanups, initially Kumar suggested to rename spi_mpc83xx.c to spi_mpc8xxx.c, but checkpatch told me to fix some other issues. So the following cleanups were prepared: [5/9] spi_mpc83xx: Fix checkpatch issues [6/9] spi_mpc83xx: Split mpc83xx_spi_work() into two routines [7/9] spi_mpc83xx: Remove dead code [8/9] spi_mpc83xx: Rename spi_83xx.c to spi_8xxx.c [9/9] spi_mpc8xxx: s/83xx/8xxx/g Thanks, -- Anton Vorontsov email: cbouatmailru-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org irc://irc.freenode.net/bd2 ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf