From: Anton Vorontsov Subject: [PATCH 2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message Date: Fri, 1 May 2009 03:48:23 +0400 Message-ID: <20090430234823.GB7901@oksana.dev.rtsoft.ru> References: <20090430234739.GA27709@oksana.dev.rtsoft.ru> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, Andrew Morton , David Brownell , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: Kumar Gala Return-path: Content-Disposition: inline In-Reply-To: <20090430234739.GA27709-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-spi.vger.kernel.org When a platform is running at high frequencies it's not always possible to scale-down a frequency to a requested value, and using mmc_spi driver this leads to the following printk flood during card polling: ... mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use 520828 Hz instead. mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use 520828 Hz instead. ... Fix this by using WARN_ONCE(), it's better than the flood, and also better than turning dev_err() into dev_dbg(), since we actually want to warn that some things may not work correctly. Signed-off-by: Anton Vorontsov --- drivers/spi/spi_mpc83xx.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index f4573a9..08b49d2 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -275,12 +276,12 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if ((mpc83xx_spi->spibrg / hz) > 64) { cs->hw_mode |= SPMODE_DIV16; pm = mpc83xx_spi->spibrg / (hz * 64); - if (pm > 16) { - dev_err(&spi->dev, "Requested speed is too " - "low: %d Hz. Will use %d Hz instead.\n", - hz, mpc83xx_spi->spibrg / 1024); + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc83xx_spi->spibrg / 1024); + if (pm > 16) pm = 16; - } } else pm = mpc83xx_spi->spibrg / (hz * 4); if (pm) -- 1.6.2.2 ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf