From: Andrew Morton Subject: Re: [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD Date: Mon, 4 May 2009 13:55:04 -0700 Message-ID: <20090504135504.a6a6afcf.akpm@linux-foundation.org> References: <20090430234739.GA27709@oksana.dev.rtsoft.ru> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: linuxppc-dev@ozlabs.org, dbrownell@users.sourceforge.net, linux-kernel@vger.kernel.org, spi-devel-general@lists.sourceforge.net To: avorontsov@ru.mvista.com Return-path: In-Reply-To: <20090430234739.GA27709@oksana.dev.rtsoft.ru> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+glppe-linuxppc-embedded-2=m.gmane.org@ozlabs.org Errors-To: linuxppc-dev-bounces+glppe-linuxppc-embedded-2=m.gmane.org@ozlabs.org List-Id: linux-spi.vger.kernel.org On Fri, 1 May 2009 03:47:39 +0400 Anton Vorontsov wrote: > Here are few patches that are needed to support spi-mmc slot on > MPC8610HPCD PowerPC boards: > > [1/9] spi_mpc83xx: Handles other Freescale processors > [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message > [3/9] spi_mpc83xx: Add small delay after asserting chip-select line > [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards > Some or all of these seem appropriate to 2.6.30 and perhaps even -stable?