From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 9 May 2009 23:17:12 +0200 Subject: [U-Boot] [PATCH v2 2/3] MX31: Add basic support for Freescale i.MX31 PDK board. In-Reply-To: References: Message-ID: <20090509211712.GG13502@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > +++ b/board/freescale/mx31pdk/lowlevel_init.S > @@ -0,0 +1,30 @@ > +/* > + * (C) Copyright 2008 Magnus Lilja > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +/* > + * This is just to keep the linker happy. > + */ > + > +.globl lowlevel_init > + > +lowlevel_init: > + mov pc, lr why do you need it? > diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c > new file mode 100644 > index 0000000..9eed979 > --- /dev/null > +++ b/board/freescale/mx31pdk/mx31pdk.c > @@ -0,0 +1,76 @@ > +/* > + * > + * (C) Copyright 2008 Magnus Lilja > + * > + * (c) 2007 Pengutronix, Sascha Hauer > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > + > +#include > +#include > +#include > + > +DECLARE_GLOBAL_DATA_PTR; > + > +int dram_init(void) > +{ > + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > + > + return 0; > +} > + > +int board_init(void) > +{ > + /* CS5: CPLD incl. network controller */ > + __REG(CSCR_U(5)) = 0x0000d843; > + __REG(CSCR_L(5)) = 0x22252521; > + __REG(CSCR_A(5)) = 0x22220a00; > + > + /* setup pins for UART1 */ > + mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); > + mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); > + mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); > + mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); I think it's time to create common device init functions as done for davinci or at91 > + > + /* SPI2 */ > + mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B); > + mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); > + mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); > + mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); > + mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); > + mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); > + mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B); ditto > + > + /* start SPI2 clock */ > + __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4); > + > + gd->bd->bi_arch_number = MACH_TYPE_MX31_3DS; /* board id for linux */ > + gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */ please use this style RAM_BASE + 0x100 as other arm board > + > + return 0; > +} > + > diff --git a/board/freescale/mx31pdk/u-boot.lds b/board/freescale/mx31pdk/u-boot.lds > new file mode 100644 > index 0000000..e96509a > --- /dev/null > +++ b/board/freescale/mx31pdk/u-boot.lds I've send a patch that unify all arm lds so this one is not anymore needed > @@ -0,0 +1,59 @@ > +/* > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include why? > + > +/* High Level Configuration Options */ > +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ ^^^^ whitespate please remove > +#define CONFIG_MX31 1 /* in a mx31 */ ^^^^ whitespate please remove > +#define CONFIG_MX31_HCLK_FREQ 26000000 > +#define CONFIG_MX31_CLK32 32768 > + > +#define CONFIG_DISPLAY_CPUINFO > +#define CONFIG_DISPLAY_BOARDINFO > + > +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ^^^^ whitespate please remove > +#define CONFIG_SETUP_MEMORY_TAGS 1 > +#define CONFIG_INITRD_TAG 1 > + > +/* No support for NAND boot for i.MX31 PDK yet, so we rely on some other > + * program to initialize the SDRAM. > + */ > +#define CONFIG_SKIP_LOWLEVEL_INIT > + > +/* > + * Size of malloc() pool > + */ > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) > +/* Bytes reserved for initial data */ > +#define CONFIG_SYS_GBL_DATA_SIZE 128 > + > +/* > + * Hardware drivers > + */ > + > +#define CONFIG_MX31_UART 1 > +#define CONFIG_SYS_MX31_UART1 1 > + > +#define CONFIG_HARD_SPI 1 > +#define CONFIG_MXC_SPI 1 > +#define CONFIG_DEFAULT_SPI_BUS 1 > +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) > + > +#define CONFIG_RTC_MC13783 1 > + > +/* MC13783 connected to CSPI2 and SS2 */ > +#define CONFIG_MC13783_SPI_BUS 1 > +#define CONFIG_MC13783_SPI_CS 2 > + > +/* allow to overwrite serial and ethaddr */ > +#define CONFIG_ENV_OVERWRITE > +#define CONFIG_CONS_INDEX 1 > +#define CONFIG_BAUDRATE 115200 > +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} > + > +/*********************************************************** > + * Command definition > + ***********************************************************/ > + > +#include > + > +#define CONFIG_CMD_MII > +#define CONFIG_CMD_PING > +#define CONFIG_CMD_SPI > +#define CONFIG_CMD_DATE > + > +/* Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require > + * that CFG_NO_FLASH is undefined). > + */ please remove the comment > +#undef CONFIG_CMD_IMLS > + > +#define CONFIG_BOOTDELAY 3 > + > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ > + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ > + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ > + "bootcmd=run bootcmd_net\0" \ > + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ > + "tftpboot 0x81000000 uImage-mx31; bootm\0" > + > +#define CONFIG_DRIVER_SMC911X 1 > +#define CONFIG_DRIVER_SMC911X_BASE CS5_BASE > +#define CONFIG_DRIVER_SMC911X_32_BIT 1 > + > +/* > + * Miscellaneous configurable options > + */ > +#define CONFIG_SYS_LONGHELP /* undef to save memory */ > +#define CONFIG_SYS_PROMPT "uboot> " > +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ ^^ whitespate please remove > +/* Print Buffer Size */ > +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ > + sizeof(CONFIG_SYS_PROMPT)+16) > +/* max number of command args */ > +#define CONFIG_SYS_MAXARGS 16 > +/* Boot Argument Buffer Size */ > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE > + > +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 /* memtest works on */ ^^ whitespate please remove > +#define CONFIG_SYS_MEMTEST_END 0x10000 > + > +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ > + > +#define CONFIG_SYS_HZ 1000 > + > +#define CONFIG_CMDLINE_EDITING 1 > + > +/*----------------------------------------------------------------------- > + * Stack sizes > + * > + * The stack sizes are set up in start.S using the settings below > + */ > +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ > + > +/*----------------------------------------------------------------------- > + * Physical Memory Map > + */ > +#define CONFIG_NR_DRAM_BANKS 1 > +#define PHYS_SDRAM_1 CSD0_BASE > +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) > + > +/*----------------------------------------------------------------------- > + * FLASH and environment organization > + */ > +/* No NOR flash present */ > +#define CONFIG_SYS_NO_FLASH 1 > + > +#define CONFIG_ENV_IS_NOWHERE 1 ^ whitespate please remove Best Regards, J.