From: Paul Walmsley Subject: [PATCH 09/10] OMAP3 clock: lessen amount of noisy messages Date: Tue, 12 May 2009 18:05:27 -0600 Message-ID: <20090513000525.10349.18270.stgit@localhost.localdomain> References: <20090512235713.10349.49339.stgit@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from utopia.booyaka.com ([72.9.107.138]:56432 "EHLO utopia.booyaka.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757127AbZEMAHp (ORCPT ); Tue, 12 May 2009 20:07:45 -0400 In-Reply-To: <20090512235713.10349.49339.stgit@localhost.localdomain> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-arm-kernel@lists.arm.linux.org.uk Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, Artem Bityutskiy , Paul Walmsley From: Artem Bityutskiy On our system we see the following messages: Disabling unused clock "gpt2_ick" Disabling unused clock "gpt3_ick" Disabling unused clock "gpt4_ick" Disabling unused clock "gpt5_ick" ... The messages have KERN_INFO level and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from. Let's give them debugging level instead. Signed-off-by: Artem Bityutskiy Signed-off-by: Paul Walmsley [paul@pwsan.com: trimmed debugging output in patch description] --- arch/arm/mach-omap2/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 8935a8b..076f0a7 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == v) return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); if (cpu_is_omap34xx()) { omap2_clk_enable(clk); omap2_clk_disable(clk);