From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 18 May 2009 23:50:23 +0200 Subject: [U-Boot] [PATCH] OMAP3: Fix CKE1 MUX setting to allow self-refresh In-Reply-To: <1242455954-22981-1-git-send-email-dirk.behme@googlemail.com> References: <1242455954-22981-1-git-send-email-dirk.behme@googlemail.com> Message-ID: <20090518215023.GO17539@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08:39 Sat 16 May , Dirk Behme wrote: > The Beagle rev Cx and Overo boards are using both SDRC CSes. The MUX > setting is needed for the second CS clock signal to allow the 2 RAM > parts to be put in self-refresh correctly. This also works on rev B > Beagle boards with 128M of RAM. > > From: Steve Sakoman > From: Jean Pihet > Signed-off-by: Jean Pihet > Signed-off-by: Steve Sakoman > Signed-off-by: Dirk Behme > --- apply to next > > board/omap3/beagle/beagle.h | 2 +- > board/omap3/overo/overo.h | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > Index: u-boot-main/board/omap3/overo/overo.h > =================================================================== please use git > --- u-boot-main.orig/board/omap3/overo/overo.h > +++ u-boot-main/board/omap3/overo/overo.h > @@ -376,6 +376,6 @@ const omap3_sysinfo sysinfo = { > MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ > MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ > MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ > - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ > + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ it really time to use a better mux api + a device init framework to simplify this (not requiered for this patch) Best Regards, J.