From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 31 May 2009 13:51:03 +0200 Subject: [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code In-Reply-To: <1243668623-7994-1-git-send-email-dirk.behme@googlemail.com> References: <1243668623-7994-1-git-send-email-dirk.behme@googlemail.com> Message-ID: <20090531115103.GA20818@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09:30 Sat 30 May , Dirk Behme wrote: > Reset is SoC specific and not ARM Cortex A8 generic. Move it from generic > code to OMAP3 SoC specific file. > > CC: "Kim, Heung Jun" > Signed-off-by: Dirk Behme > > --- > > This patches fixes the second issue found by riverful in > > http://lists.denx.de/pipermail/u-boot/2009-May/053433.html > > The first issue is fixed by > > http://lists.denx.de/pipermail/u-boot/2009-May/053444.html > > cpu/arm_cortexa8/omap3/lowlevel_init.S | 12 ++++++++++++ > cpu/arm_cortexa8/start.S | 14 -------------- > 2 files changed, 12 insertions(+), 14 deletions(-) > > Index: u-boot-arm/cpu/arm_cortexa8/omap3/lowlevel_init.S > =================================================================== > --- u-boot-arm.orig/cpu/arm_cortexa8/omap3/lowlevel_init.S > +++ u-boot-arm/cpu/arm_cortexa8/omap3/lowlevel_init.S > @@ -181,6 +181,18 @@ lowlevel_init: > /* back to arch calling code */ > mov pc, lr > > +.global reset_cpu > +reset_cpu: > + ldr r1, rstctl @ get addr for global reset > + @ reg > + mov r3, #0x2 @ full reset pll + mpu > + str r3, [r1] @ force reset > + mov r0, r0 > +_loop_forever: > + b _loop_forever > +rstctl: > + .word PRM_RSTCTRL > + please move this to reset.S other wise fine Best Regards, J.