From: Matthias Kaehlcke Date: Thu, 4 Jun 2009 19:49:25 +0200 Subject: [U-Boot] [PATCH 2/2] KB9202: Add NAND support In-Reply-To: <200906040853.10424.sr@denx.de> References: <20090515221544.GF7923@traven> <4A0DED18.9000806@freescale.com> <20090603174200.GC3813@darwin> <200906040853.10424.sr@denx.de> Message-ID: <20090604174925.GB3806@darwin> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de El Thu, Jun 04, 2009 at 08:53:10AM +0200 Stefan Roese ha dit: > On Wednesday 03 June 2009 19:42:00 Matthias Kaehlcke wrote: > > > > > here is a version of the patch that addresses the issues you pointed > > out. sorry for the late response, my development system died and i > > needed some time to get a new machine and restore the setup > > > > -- > > > > This is a forward port of the patch submitted by Christian from > > Kwikbyte in 06/2007 > > (http://lists.denx.de/pipermail/u-boot/2007-June/022068.html) > > > > Signed-off-by: Matthias Kaehlcke > > --- > > board/kb9202/Makefile | 2 +- > > board/kb9202/nand.c | 153 > > ++++++++++++++++++++++++++++++++++++++++++++++ include/configs/kb9202.h | > > 10 +++- > > 3 files changed, 163 insertions(+), 2 deletions(-) > > create mode 100644 board/kb9202/nand.c > > I suggest to move this driver to drivers/mtd/nand instead. i thought drivers/mtd/nand is for generic nand drivers, mine - at least atm - is kb9202 specific. if it's really preferred to have board specific drivers in drivers/mtd/nand i'll the adapt the patch happily. -- Matthias Kaehlcke Embedded Linux Engineer Barcelona Yo soy como soy y t? eres como eres, construyamos un mundo donde yo pueda ser sin dejar de ser yo, donde t? puedas ser sin dejar de ser t?, y donde ni yo ni t? obliguemos al otro a ser como yo o como t? .''`. using free software / Debian GNU/Linux | http://debian.org : :' : `. `'` gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-