From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 20 Jun 2009 19:20:08 +0200 Subject: [U-Boot] V3 Zoom hw reset In-Reply-To: <4A3B5889.8040702@denx.de> References: <1245356024-2138-1-git-send-email-Tom.Rix@windriver.com> <4A3B5889.8040702@denx.de> Message-ID: <20090620172008.GB19715@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11:21 Fri 19 Jun , Heiko Schocher wrote: > Hello Tom, > > Tom Rix wrote: > > The i2c patch is a cleaned up version of the one I RFC-ed to the list > > earlier. It addresses Nishanth's concerns by using the kernel's algorithm > > and by making the major parameters overridable by a board config. > > Jean's request for no weak function is addressed by this being done only > > with #defines. I have reverified on the hw listed in the commit. > > > > The twl4030 patch I don't think anyone had a problem with. > > > > The twl4030 hw reset has been generalized. After analyzing beagle > > schematics, I believe this can be used by anyone with supporting hw. > > So the function stays in power.c and the #ifdef's are removed. > > I think your 3 patches are OK, and if Jean-Christophe give his > Acked-by, I can add this to the i2c tree and send a pull request > to Wolfgang, or if Jean-Christophe wants to add this to the arm > tree I give my Acked-by to your patches. if it's confirm that it's also work on omap2 Ack Best Regards, J.