From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 24 Jun 2009 01:40:01 +0200 Subject: [U-Boot] [PATCH-ARM 1/2] Add support for the Embest SBC2440-II Board In-Reply-To: <4A3FD5C5.6030900@freescale.com> References: <4A3BC001.3010103@fearnside-systems.co.uk> <20090620173600.GC19715@game.jcrosoft.org> <4A3D7717.9070809@fearnside-systems.co.uk> <20090621094635.GF22845@game.jcrosoft.org> <4A3FD5C5.6030900@freescale.com> Message-ID: <20090623234001.GS23512@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 14:04 Mon 22 Jun , Scott Wood wrote: > Jean-Christophe PLAGNIOL-VILLARD wrote: > >no as you add the nand in this patch > >the nand need to be add in a seperate patch, > >this one need to only add the s3c2440 support > >and the nand will be handle by Scott the nand Maintainer > > If a NAND patch is sandwiched in the middle of other patches that > need to go via an arch tree, and depends on some of those patches, > I'd rather ack the NAND bits to go through the arch tree rather than > try to merge everything separately while still maintaining > dependencies. In that case, keeping the NAND bits in a separate > patch is nice, but not mandatory IMHO. To simplify bisect and merge I prefer to have the nand adding in an other patch Best Regards, J.