Return-Path: Received: from ozlabs.org (ozlabs.org [203.10.76.45]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "mx.ozlabs.org", Issuer "CA Cert Signing Authority" (verified OK)) by bilbo.ozlabs.org (Postfix) with ESMTPS id 8C246B70A9 for ; Thu, 25 Jun 2009 02:31:38 +1000 (EST) Received: from buildserver.ru.mvista.com (unknown [213.79.90.228]) by ozlabs.org (Postfix) with ESMTP id 1A2DADDD01 for ; Thu, 25 Jun 2009 02:31:36 +1000 (EST) Date: Wed, 24 Jun 2009 20:30:28 +0400 From: Anton Vorontsov To: Kumar Gala Subject: [PATCH] powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards Message-ID: <20090624163028.GA18825@oksana.dev.rtsoft.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Cc: linuxppc-dev@ozlabs.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Linux isn't able to detect link changes on ethernet ports that were used by U-Boot. This is because U-Boot wrongly clears interrupt polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR, 0x1b) of Marvell PHYs. There is no easy way for PHY drivers to know IRQ line polarity (we could extract it from the device tree and pass it to phydevs, but that'll be quite a lot of work), so for now just reset the PHYs to their default states. Signed-off-by: Anton Vorontsov --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 3268c95..34664c0 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -223,6 +223,19 @@ static void __init mpc85xx_mds_setup_arch(void) /* Turn UCC1 & UCC2 on */ setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } else if (machine_is(mpc8569_mds)) { +#define BCSR7_UCC12_GETHnRST (0x1 << 2) +#define BCSR8_UEM_MARVELL_RST (0x1 << 1) + /* + * U-Boot mangles interrupt polarity for Marvell PHYs, + * so reset built-in and UEM Marvell PHYs, this puts + * the PHYs into their normal state. + */ + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); } iounmap(bcsr_regs); } -- 1.6.3.1