From: Anton Vorontsov Subject: [PATCH 0/4 for 2.6.31] NET: Revive fixed link support Date: Sat, 27 Jun 2009 02:29:00 +0400 Message-ID: <20090626222900.GA14594@oksana.dev.rtsoft.ru> Reply-To: avorontsov@ru.mvista.com Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Cc: Grant Likely , Li Yang , Andy Fleming , netdev@vger.kernel.org, linuxppc-dev@ozlabs.org To: David Miller Return-path: Received: from ru.mvista.com ([213.79.90.228]:11802 "EHLO buildserver.ru.mvista.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750875AbZFZW3A (ORCPT ); Fri, 26 Jun 2009 18:29:00 -0400 Content-Disposition: inline Sender: netdev-owner@vger.kernel.org List-ID: Hi all, The fixed link support is broken since The Big OF MDIO Rework, the rework simply removed most of the code that was needed for fixed links. Too bad I didn't notice this earlier, I saw a bunch of patches on the ml, but unfortunately I didn't look very close presuming that Grant knew what he was doing. :-) And obviously I didn't test linux-next on anything that requires a fixed link. Anyway, here are four patches. The first one adds the fixed link support to a framework, otherwise we'd duplicate the code across the drivers (as we did previously), and I tried to keep drivers' changes minimal. Patches 2 and 3 are for the drivers that I tested in run-time, with normal PHYs, and fixed links. Patch #4 was build-tested, but I believe it should work in run-time too. Thanks, -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2