From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 1 Jul 2009 00:44:11 +0200 Subject: [U-Boot] [PATCH 1/2] at91: Add CAN init function In-Reply-To: <1246342144460-git-send-email-Daniel.Gorsulowski@esd.eu> References: <1246342144460-git-send-email-Daniel.Gorsulowski@esd.eu> Message-ID: <20090630224411.GQ23292@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08:09 Tue 30 Jun , Daniel Gorsulowski wrote: > To enable CAN init, CONFIG_CAN has to be defined in the board config file > and at91_can_hw_init() has to be called in the board specific code. > > CAN is available on AT91SAM9263 and AT91CAP9 SoC. > > Signed-off-by: Daniel Gorsulowski > --- > cpu/arm926ejs/at91/at91cap9_devices.c | 15 +++++++++++++++ > cpu/arm926ejs/at91/at91sam9263_devices.c | 15 +++++++++++++++ > include/asm-arm/arch-at91/at91_common.h | 1 + > 3 files changed, 31 insertions(+), 0 deletions(-) Applied to u-boot-arm Best Regards, J.