From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 7 Jul 2009 23:03:53 +0200 Subject: [U-Boot] [PATCH] PalmTC support In-Reply-To: <200907021200.03012.marek.vasut@gmail.com> References: <200907020319.19826.marek.vasut@gmail.com> <4A4C5CFB.8040809@denx.de> <200907021200.03012.marek.vasut@gmail.com> Message-ID: <20090707210353.GR30172@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 12:00 Thu 02 Jul , Marek Vasut wrote: > Dne ?t 2. ?ervence 2009 09:08:43 Anatolij Gustschin napsal(a): > > Hi, > > > > Marek Vasut wrote: > > > I'd like to get this patch in. It adds support for Palm Tungsten|C (a > > > pxa255 based handheld device). > > > > > > The patch is available here (it's not all that hacky anymore): > > > > patches for inclusion must be sent to the list. The merge window > > for next release is open until Sun Jul 19, 2009. > > See also http://www.denx.de/wiki/U-Boot/Patches > > > > Thanks, > > Anatolij > > Patch is included in this mail. Do you also need S-O-B line? > From 983470aca6ab55c1f617af1f6a30ace81638eedb Mon Sep 17 00:00:00 2001 > From: Marek Vasut > Date: Tue, 9 Jun 2009 00:32:18 +0200 > Subject: [PATCH] Hacky PalmTC support for uboot > > --- > Makefile | 3 + > board/palmtc/Makefile | 54 ++++++ > board/palmtc/config.mk | 3 + > board/palmtc/lowlevel_init.S | 435 ++++++++++++++++++++++++++++++++++++++++++ > board/palmtc/palmtc.c | 72 +++++++ > board/palmtc/u-boot.lds | 56 ++++++ > cpu/pxa/pxafb.c | 34 ++++ > include/configs/palmtc.h | 238 +++++++++++++++++++++++ > 8 files changed, 895 insertions(+), 0 deletions(-) > create mode 100644 board/palmtc/Makefile > create mode 100644 board/palmtc/config.mk > create mode 100644 board/palmtc/lowlevel_init.S > create mode 100644 board/palmtc/palmtc.c > create mode 100644 board/palmtc/u-boot.lds > create mode 100644 include/configs/palmtc.h > > diff --git a/Makefile b/Makefile > index 24e6410..3fdb1c9 100644 > --- a/Makefile > +++ b/Makefile > @@ -3041,6 +3041,9 @@ scpu_config: unconfig > pxa255_idp_config: unconfig > @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp > > +palmtc_config: unconfig > + @$(MKCONFIG) $(@:_config=) arm pxa palmtc > + > trizepsiv_config : unconfig > @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv > > diff --git a/board/palmtc/Makefile b/board/palmtc/Makefile > new file mode 100644 > index 0000000..92e5288 > --- /dev/null > +++ b/board/palmtc/Makefile > @@ -0,0 +1,54 @@ > + > +# > +# Copyright (C) 2009 > +# Marek Vasut > +# > +# Heavily based on pxa255_idp platform > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > +# MA 02111-1307 USA > +# > + > +include $(TOPDIR)/config.mk > + > +LIB = $(obj)lib$(BOARD).a > + > +COBJS := palmtc.o > +SOBJS := lowlevel_init.o > + > +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > +OBJS := $(addprefix $(obj),$(COBJS)) > +SOBJS := $(addprefix $(obj),$(SOBJS)) > + > +$(LIB): $(obj).depend $(OBJS) $(SOBJS) > + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) > + > +clean: > + rm -f $(SOBJS) $(OBJS) > + > +distclean: clean > + rm -f $(LIB) core *.bak $(obj).depend > + > +######################################################################### > + > +# defines $(obj).depend target > +include $(SRCTREE)/rules.mk > + > +sinclude $(obj).depend > + > +######################################################################### > diff --git a/board/palmtc/config.mk b/board/palmtc/config.mk > new file mode 100644 > index 0000000..bcb42e7 > --- /dev/null > +++ b/board/palmtc/config.mk > @@ -0,0 +1,3 @@ > +#TEXT_BASE = 0xa1700000 > +TEXT_BASE = 0xa1000000 > +#TEXT_BASE = 0 > diff --git a/board/palmtc/lowlevel_init.S b/board/palmtc/lowlevel_init.S > new file mode 100644 > index 0000000..325bfbd > --- /dev/null > +++ b/board/palmtc/lowlevel_init.S > @@ -0,0 +1,435 @@ > +/* > + * Most of this taken from Redboot hal_platform_setup.h with cleanup > + * > + * NOTE: I haven't clean this up considerably, just enough to get it > + * running. See hal_platform_setup.h for the source. See > + * board/cradle/lowlevel_init.S for another PXA250 setup that is > + * much cleaner. > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#include > +#include > +#include > + > +DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE > + > +/* wait for coprocessor write complete */ > + .macro CPWAIT reg > + mrc p15,0,\reg,c2,c0,0 > + mov \reg,\reg > + sub pc,pc,#4 > + .endm > + > +/* wait for clock to stabilize */ > + .macro CLKWAIT please lowercase and this style .macro wait_clk ldr r3, =OSCR /* reset the OS Timer Count to zero */ mov r2, #0 str r2, [r3] ldr r4, =0x300 /* really 0x2E1 is about 200usec, * so 0x300 should be plenty */ 1: ldr r2, [r3] cmp r4, r2 bgt 1b .endm and wait we have wait_timer macro > + > +/* > + * Memory setup > + */ > +.globl lowlevel_init > +lowlevel_init: > + > + /* save jump address */ > + mov r10, lr > + > + /* Set up GPIO pins first ----------------------------------------- */ > + ldr r0, =GPSR0 > + ldr r1, =CONFIG_SYS_GPSR0_VAL > + str r1, [r0] please write32 > + > + ldr r0, =GPSR1 > + ldr r1, =CONFIG_SYS_GPSR1_VAL > + str r1, [r0] ditto > + > + ldr r0, =GPSR2 > + ldr r1, =CONFIG_SYS_GPSR2_VAL > + str r1, [r0] ditto etc... > + > + ldr r0, =GPCR0 > + ldr r1, =CONFIG_SYS_GPCR0_VAL > + str r1, [r0] > + > + CLKWAIT > + + > + /* disable all sdram banks */ > +#ifndef CONFIG_BOOT_PALMOS > + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) > +#endif why? > + bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) > + > + > +endlowlevel_init: no need please remove > + > + mov pc, r10 > diff --git a/board/palmtc/palmtc.c b/board/palmtc/palmtc.c > new file mode 100644 > index 0000000..f865a96 > --- /dev/null > +++ b/board/palmtc/palmtc.c > @@ -0,0 +1,72 @@ > +/* > + * Copyright (C) 2009 > + * Marek Vasut > + * > + * Heavily based on pxa255_idp platform > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#include > +#include > + > +DECLARE_GLOBAL_DATA_PTR; > + > +/* > + * Miscelaneous platform dependent initialisations > + */ > + > +int board_init (void) > +{ > + /* memory and cpu-speed are setup before relocation */ > + /* so we do _nothing_ here */ > + > + /* arch number of Lubbock-Board */ > + gd->bd->bi_arch_number = MACH_TYPE_PALMTC; > + > + /* Adress of boot parameters */ > + gd->bd->bi_boot_params = 0xa0000100; please this style RAM_BASE + 0x100; > + > + /* Set PWM for LCD */ > + PWM_CTRL1 = 0x5f; > + PWM_PERVAL1 = 0x3ff; > + PWM_PWDUTY1 = 892; please use proper acessor writex > + > + return 0; > +} > + > +int board_late_init(void) > +{ > +#ifdef CONFIG_LCD > + setenv("stdout", "lcd"); > + setenv("stderr", "lcd"); > +#else > + setenv("stdout", "serial"); > + setenv("stderr", "serial"); > +#endif you can use iomux to have the both active at the sametime > + return 0; > +} > + > + > +int dram_init (void) > +{ > + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > + return 0; > +} > diff --git a/board/palmtc/u-boot.lds b/board/palmtc/u-boot.lds no need please remove > diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c please do this in onther patch > index 97efcb6..8d86edf 100644 > --- a/cpu/pxa/pxafb.c > +++ b/cpu/pxa/pxafb.c > @@ -147,6 +147,40 @@ vidinfo_t panel_info = { > #endif /* CONFIG_HITACHI_SX14 */ > > /*----------------------------------------------------------------------*/ > +#ifdef CONFIG_ACX517AKN > + > +# define LCD_BPP LCD_COLOR8 > +# define LCD_INVERT_COLORS /* This looks more 1337 (or how do they call it) ;-) */ > + > +/* you have to set lccr0 and lccr3 (including pcd) */ > +# define REG_LCCR0 0x003008f9 > +# define REG_LCCR3 0x03700006 > + > +vidinfo_t panel_info = { > + vl_col: 320, > + vl_row: 320, > + vl_width: 320, > + vl_height: 320, > + vl_clkp: CONFIG_SYS_HIGH, > + vl_oep: CONFIG_SYS_LOW, > + vl_hsp: CONFIG_SYS_LOW, > + vl_vsp: CONFIG_SYS_LOW, > + vl_dp: CONFIG_SYS_HIGH, > + vl_bpix: LCD_BPP, > + vl_lbw: 0, > + vl_splt: 1, > + vl_clor: 1, > + vl_tft: 1, > + vl_hpw: 0x04, > + vl_blw: 0x1c, > + vl_elw: 0x08, > + vl_vpw: 0x01, > + vl_bfw: 0x07, > + vl_efw: 0x08, > +}; > +#endif /* CONFIG_ACX517AKN */ > + > +/*----------------------------------------------------------------------*/ > > #if LCD_BPP == LCD_COLOR8 > void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); > diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h > new file mode 100644 > index 0000000..187a165 > --- /dev/null > +++ b/include/configs/palmtc.h > @@ -0,0 +1,238 @@ > +/* > + * Copyright (C) 2009 > + * Marek Vasut > + * Configuration settings for Palm Tungsten|C > + * > + * Heavily based on pxa255_idp platform > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#include > + > +/* > + * High Level Configuration Options > + * (easy to change) > + */ > +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ > +#define CONFIG_PALMTC 1 /* Palm Tungsten|C board */ > +#define BOARD_LATE_INIT 1 > +#define CONFIG_BOOT_PALMOS 1 /* Dont disable memory we are running from */ > +#define CONFIG_SHOW_BOOT_PROGRESS 1 > +#define CONFIG_MMC 1 /* Enable MMC card */ > +#define CONFIG_LCD > + > + > +#ifdef CONFIG_LCD > +#define CONFIG_ACX517AKN > +#define CONFIG_VIDEO_LOGO > +#endif > + > +#ifdef CONFIG_MMC > +#define CONFIG_DOS_PARTITION > +#define CONFIG_PXA_MMC > +#define CONFIG_CMD_MMC > +#define CONFIG_SYS_MMC_BASE 0xF0000000 > +#endif > + > +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > + > +/* we will never enable dcache, because we have to setup MMU first */ > +#define CONFIG_SYS_NO_DCACHE no need please remove > + > +/* > + * Size of malloc() pool > + */ > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_STACKSIZE) > +#define CONFIG_SYS_GBL_DATA_SIZE 512 /* size in bytes reserved for initial data */ > + > +/* > + * select serial console configuration > + */ > +#define CONFIG_FFUART 1 /* we use FFUART on PalmTC */ > + > +/* allow to overwrite serial and ethaddr */ > +#define CONFIG_ENV_OVERWRITE > + > +/* Default baudrate on FFUART */ > +#define CONFIG_BAUDRATE 57600 why not 115200? > + > +/* > + * Command line configuration. > + */ > +#include > + > +#define CONFIG_CMD_FAT > +#undef CONFIG_CMD_NET > +#undef CONFIG_CMD_NFS > +#undef CONFIG_CMD_BOOTD > + > +#define CONFIG_BOOTDELAY 1 > +#define CONFIG_BOOTCOMMAND "mmc init || bootm 0x80000 ; echo \"Booting uImage from mmc[0]:/uImage\" ; fatload mmc 0 0xa3000000 uImage ; bootm 0xa3000000" too long please fix > +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,57600" > + > +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ > +#define CONFIG_SETUP_MEMORY_TAGS 1 > +#define CONFIG_INITRD_TAG 1 > + > +#if defined(CONFIG_CMD_KGDB) > +#define CONFIG_KGDB_BAUDRATE 57600 /* speed to run kgdb serial port */ > +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ > +#endif are sure this work? > + > +/* > + * Miscellaneous configurable options > + */ > +#define CONFIG_SYS_HUSH_PARSER 1 > +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " > + > +#define CONFIG_SYS_LONGHELP /* undef to save memory */ > +#ifdef CONFIG_SYS_HUSH_PARSER > +#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ > +#else > +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ > +#endif why different? > +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ > +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ > +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ > +#define CONFIG_SYS_DEVICE_NULLDEV 1 > + > +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ > +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ > + > +#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ > + > +#define CONFIG_SYS_HZ 1000 > +#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ > + > +#define RTC 1 /* enable 32KHz osc */ please use CONFIG_ something > + > + /* valid baudrates */ > +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } please near the default board rate define > + > +/* > + * Stack sizes > + * > + * The stack sizes are set up in start.S using the settings below > + */ > +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ please add a space before and after '*' > +#ifdef CONFIG_USE_IRQ > +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ > +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ > +#endif > + > +/* > + * Physical Memory Map > + */ > +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ > +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ > +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ > + > +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ > +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ why define 2 if you only use 1? > +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ > +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ > +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 2*128 KB sectors (x16) */ > + > +#define CONFIG_SYS_DRAM_BASE 0xa0000000 > +#define CONFIG_SYS_DRAM_SIZE 0x04000000 > + > +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 > + Best Regards, J.