From: Steven Luo Date: Thu, 9 Jul 2009 14:12:21 -0700 Subject: [ath9k-devel] [PATCH] ath9k: Fix enabling OFDM weak signal detection Message-ID: <20090709211221.GA4854@steven676.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org From: Steven Luo It seems that OFDM weak signal detection should be enabled after an ANI state reset, as indicated by the initial setting of ofdmWeakSigDetectOff and what the open Atheros HAL does. Unfortunately, the reversed sense of ofdmWeakSigDetectOff (true if weak signal detection is NOT enabled) seems to have resulted in a mixup here, causing weak signal detection to be disabled. This patch significantly improves reception and throughput from distant stations for my AR5416-based AP running compat-wireless 2009-06-25. Signed-off-by: Steven Luo Cc: stable at kernel.org --- --- a/drivers/net/wireless/ath/ath9k/ani.c 2009-06-24 21:14:00.000000000 -0700 +++ b/drivers/net/wireless/ath/ath9k/ani.c 2009-07-06 02:45:57.000000000 -0700 @@ -482,7 +482,7 @@ void ath9k_ani_reset(struct ath_hw *ah) ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0); ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0); ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION, - !ATH9K_ANI_USE_OFDM_WEAK_SIG); + ATH9K_ANI_USE_OFDM_WEAK_SIG); ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR, ATH9K_ANI_CCK_WEAK_SIG_THR);