From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 18 Jul 2009 12:55:38 +0200 Subject: [U-Boot] arm, i2c: added support for the TWSI I2C Interface In-Reply-To: <4A5EDE3F.50303@denx.de> References: <4A5EDE3F.50303@denx.de> Message-ID: <20090718105538.GC27443@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10:01 Thu 16 Jul , Heiko Schocher wrote: > added support for the Hardware I2C TWSI Interface on > kirkwood SOCs, based on the Linux driver, without IRQ > support. > > Tested on a ARM926EJS (CPU Core Version FEROCEON_88FR131 > SOC Family: KIRKWOOD, KW88F6281) based suen3 board > > Signed-off-by: Heiko Schocher could apply the following CONFIG name convention cleanup before please > --- > drivers/i2c/Makefile | 1 + > drivers/i2c/mv64xxx-i2c.c | 452 +++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 453 insertions(+), 0 deletions(-) > create mode 100644 drivers/i2c/mv64xxx-i2c.c > > diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile > index ef32f13..ce30111 100644 > --- a/drivers/i2c/Makefile > +++ b/drivers/i2c/Makefile > @@ -33,6 +33,7 @@ COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o > COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o > COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o > COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o > +COBJS-$(CONFIG_I2C_MV64xxx) += mv64xxx-i2c.o > COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o > COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o > COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o > diff --git a/drivers/i2c/mv64xxx-i2c.c b/drivers/i2c/mv64xxx-i2c.c > new file mode 100644 > index 0000000..6ba2782 > --- /dev/null > +++ b/drivers/i2c/mv64xxx-i2c.c > @@ -0,0 +1,452 @@ > +/* > + * Driver for the i2c controller on the Marvell line of host bridges > + * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family). > + * > + * Based on: > + * Author: Mark A. Greer > + * > + * 2005 (c) MontaVista, Software, Inc. This file is licensed under > + * the terms of the GNU General Public License version 2. This program > + * is licensed "as is" without any warranty of any kind, whether express > + * or implied. > + * > + * ported from Linux to u-boot > + * (C) Copyright 2009 > + * Heiko Schocher, DENX Software Engineering, hs at denx.de. > + * > + */ > +#include > +#include > +#include > +#include > +#include > + > +DECLARE_GLOBAL_DATA_PTR; > + > +static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0; > +#if defined(CONFIG_I2C_MUX) > +static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0; .data > +#endif no need of put it in section .data on arm > + > + > +void > +i2c_init(int speed, int slaveadd) > +{ > + mv64xxx_i2c_hw_init(); impossible to specify a speed? or update it at runtime? > +} > Best Regards, J.