Return-path: Received: from idcmail-mo1so.shaw.ca ([24.71.223.10]:48539 "EHLO idcmail-mo1so.shaw.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751439AbZHRGoc (ORCPT ); Tue, 18 Aug 2009 02:44:32 -0400 From: Thomas Fjellstrom Reply-To: tfjellstrom@shaw.ca To: linux-media@vger.kernel.org Subject: Re: KWorld UB435-Q support? Date: Tue, 18 Aug 2009 00:45:10 -0600 Cc: Jarod Wilson References: <200908122253.12021.tfjellstrom@shaw.ca> <200908171328.08301.tfjellstrom@shaw.ca> <41D273E7-E1A0-4086-A03E-9BFD32DF23C6@wilsonet.com> In-Reply-To: <41D273E7-E1A0-4086-A03E-9BFD32DF23C6@wilsonet.com> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200908180045.11071.tfjellstrom@shaw.ca> Sender: linux-media-owner@vger.kernel.org List-ID: On Mon August 17 2009, Jarod Wilson wrote: > On Aug 17, 2009, at 3:28 PM, Thomas Fjellstrom wrote: > > Yeah, I've had absolutely no luck with it so far, and have returned > > it :( > > given your experience, and mine combined, I don't think its worth > > the time to > > fix it. Especially since I can't even tune a channel on the darn > > thing in any > > OS I have access to. > > Now, did you try it with some other OS before trying it under Linux, > and it failed to work, or did you only try other OS after trying under > Linux w/that tree? There's some concern that perhaps the stick might > be getting neutered on the Linux side by an incorrect gpio setting or > something... But my stick worked (flaky usb connection aside) for > quite some time before it stopped working, even with lots of > unplugging and replugging over several days while working on the > driver... I may have plugged it in in linux before windows, but at that point I didn't have the drivers for linux installed, so I doubt incorrect gpio settings could have damaged it. > > It did indeed have trouble keeping a connection, but when ever it lost > > connection, I got that message. And the driver is pretty much stuck. > > can't > > rmmod it, and it won't redetect the stick, so every single time it > > looses > > connection, I have to reboot. Hardly a good way to work. > > Indeed. I wonder if there are bad solder joints in these, or what?... > Mine's dead, yours is dead, Mike Krufky had to RMA his first one and > his second one seems it might be dead too... :\ I dunno, but I'm thinking of just getting a HVR 1800 or similar. Go with my two PVR 150's that work flawlessly. -- Thomas Fjellstrom tfjellstrom@shaw.ca