From: Wolfgang Denk Date: Tue, 18 Aug 2009 21:45:19 +0200 Subject: [U-Boot] [PATCH v2] Add driver for the ST M41T94 SPI RTC In-Reply-To: <1250183564-6140-1-git-send-email-albin.tonnerre@free-electrons.com> References: <200908131305.37039.sr@denx.de> <1250183564-6140-1-git-send-email-albin.tonnerre@free-electrons.com> Message-ID: <20090818194519.21CC7833DBD2@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Albin Tonnerre, In message <1250183564-6140-1-git-send-email-albin.tonnerre@free-electrons.com> you wrote: > This RTC is used in some Calao boards. The driver code is taken from the > linux rtc-m41t94 driver > > Signed-off-by: Albin Tonnerre > --- > Changelog since V1: > - Use the common bin2bcd/bcd2bin functions. This patch depends on: > 1250170272-25909-2-git-send-email-albin.tonnerre at free-electrons.com > > drivers/rtc/Makefile | 1 + > drivers/rtc/m41t94.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 125 insertions(+), 0 deletions(-) > create mode 100644 drivers/rtc/m41t94.c Aplied to "next", thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are three things I always forget. Names, faces - the third I can't remember. - Italo Svevo