From: Kim Phillips Date: Fri, 21 Aug 2009 15:56:51 -0500 Subject: [U-Boot] 83xx and LCRR setting In-Reply-To: References: <4A8AAB63.8010709@denx.de> <20090819193128.62f9a4b3.kim.phillips@freescale.com> <4A8D2006.2050800@denx.de> Message-ID: <20090821155651.5afcc499.kim.phillips@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 20 Aug 2009 13:03:09 +0200 Detlev Zundel wrote: > or maybe even always use the mask, define it in the board config and do > a > > #if !defined(LCCR_MASK) > #define LCCR_MASK 0xFFFFFFFF > #endif ack. > This really depends if and how this applies to the other members of the > 83xx family. they're all the same, really. > And, by the way, we should _really_ be using accessor macros all around > ;) actually LCRR itself has specific instructions that say if written, it then should be read, and then an isync be issued. Kim