From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Tue, 25 Aug 2009 07:25:28 +0200
Subject: [U-Boot] [PATCH v6] Add support for the DevKit8000 board
In-Reply-To: <1251138695-29158-1-git-send-email-frederik@kriewitz.eu>
References: <1251138695-29158-1-git-send-email-frederik@kriewitz.eu>
Message-ID: <20090825052528.GA6736@game.jcrosoft.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 20:31 Mon 24 Aug     , Frederik Kriewitz wrote:
> This patch adds support for the DevKit8000 board.
> 
> Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
> ---
> mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
> 
> Changelog:
> v6:
>  added changelog
> 
> v5:
>  moved files from board/timll/devkit8000 to board/devkit8000
>  added omap3_ config file prefix
>  renamed README.timll to README.devkit8000
> 
> v4:
>  moved files from board/omap3/devkit8000 to board/timll/devkit8000 (vendor dir)
>  renamed README.devkit8000 to README.timll
>  fixed LIST_ARM_CORTEX_A8 order (MAKEALL)
>  fixed MAINTAINERS ordered
>  comment style changes
>  fixed potential alignment issue (enetaddr assignment)
> 
> v3
>  moved files from board/omap3/devkit8000 to board/devkit8000
>  removed omap3_ config file prefix
>  moved doc from README.omap3 to README.devkit8000
>  added MAKEALL entry
>  added warning in case a Die ID based MAC is used
>  removed reset_phy() (Ethernet is only initiated if it's needed)
>  moved CONFIG_SYS_NO_FLASH up (before #include <config_cmd_default.h>)
>  command list cleanup
>  minor define cleanups
>  moved some common kernel args to commonargs variable
> 
> v2:
>  added MAINTAINERS entry
>  code style fixes
>  copyright added
>  removed mach-types.h patch
>  command list reordered
>  boot command was moved to own variable (autoboot)
>  fixed memtest config
>  removed useless NOR flash settings
> 
>  MAINTAINERS                        |    4 +
>  MAKEALL                            |    1 +
>  Makefile                           |    3 +
>  board/devkit8000/Makefile          |   52 +++++
>  board/devkit8000/config.mk         |   35 ++++
>  board/devkit8000/devkit8000.c      |  131 +++++++++++++
>  board/devkit8000/devkit8000.h      |  373 ++++++++++++++++++++++++++++++++++++
>  doc/README.devkit8000              |   15 ++
>  include/configs/devkit8000.h       |  307 +++++++++++++++++++++++++++++
>  include/configs/omap3_devkit8000.h |  307 +++++++++++++++++++++++++++++
why do you duplicate it?
maybe an miss when updating the patch

Best Regards,
J.