From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 5 Sep 2009 01:36:13 +0200 Subject: [U-Boot] [PATCH] Add support for the Calao SBC35-A9G20 board In-Reply-To: <1251129806-31971-1-git-send-email-albin.tonnerre@free-electrons.com> References: <1251129806-31971-1-git-send-email-albin.tonnerre@free-electrons.com> Message-ID: <20090904233613.GX30118@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 18:03 Mon 24 Aug , Albin Tonnerre wrote: > The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems > . It is built around an AT91SAM9G20 ARM SoC > running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard > battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND > flash, two USB host ports, and an USB device port. More informations can be > found at > > Signed-off-by: Albin Tonnerre > --- > MAINTAINERS | 4 + > MAKEALL | 1 + > Makefile | 7 + > board/calao/sbc35_a9g20/Makefile | 55 ++++++++ > board/calao/sbc35_a9g20/config.mk | 1 + > board/calao/sbc35_a9g20/sbc35_a9g20.c | 197 ++++++++++++++++++++++++++++++ > board/calao/sbc35_a9g20/spi.c | 57 +++++++++ > cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- > include/configs/sbc35_a9g20.h | 194 +++++++++++++++++++++++++++++ > 9 files changed, 517 insertions(+), 1 deletions(-) > create mode 100644 board/calao/sbc35_a9g20/Makefile > create mode 100644 board/calao/sbc35_a9g20/config.mk > create mode 100644 board/calao/sbc35_a9g20/sbc35_a9g20.c > create mode 100644 board/calao/sbc35_a9g20/spi.c > create mode 100644 include/configs/sbc35_a9g20.h > Applied to u-boot-arm Best Regards, J.