From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 6 Sep 2009 15:18:27 +0200 Subject: [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC In-Reply-To: <1252167339-21415-1-git-send-email-eric@eukrea.com> References: <1252167339-21415-1-git-send-email-eric@eukrea.com> Message-ID: <20090906131827.GG18844@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 18:15 Sat 05 Sep , Eric Benard wrote: > these boards are built around Atmel's AT91SAM9260/9G20 and have > up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND > and include a 10/100 Ethernet PHY in RMII mode. > > Signed-off-by: Eric Benard > --- > MAINTAINERS | 5 + > MAKEALL | 2 + > Makefile | 8 + > board/eukrea/cpu9260/Makefile | 59 +++++ > board/eukrea/cpu9260/config.mk | 1 + > board/eukrea/cpu9260/cpu9260.c | 218 +++++++++++++++++ > board/eukrea/cpu9260/led.c | 153 ++++++++++++ > cpu/arm926ejs/at91/lowlevel_init.S | 3 +- > include/configs/cpu9260.h | 453 ++++++++++++++++++++++++++++++++++++ > 9 files changed, 901 insertions(+), 1 deletions(-) > create mode 100644 board/eukrea/cpu9260/Makefile > create mode 100644 board/eukrea/cpu9260/config.mk > create mode 100644 board/eukrea/cpu9260/cpu9260.c > create mode 100644 board/eukrea/cpu9260/led.c > create mode 100644 include/configs/cpu9260.h > it's looks fine Best Regards, J.