Return-path: Received: from service2.sh.cvut.cz ([147.32.127.218]:39253 "EHLO service2.sh.cvut.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751520AbZIHTGG convert rfc822-to-8bit (ORCPT ); Tue, 8 Sep 2009 15:06:06 -0400 Received: from localhost (localhost [127.0.0.1]) by service2.sh.cvut.cz (Postfix) with ESMTP id CB1363BEFB for ; Tue, 8 Sep 2009 21:06:07 +0200 (CEST) Received: from service2.sh.cvut.cz ([127.0.0.1]) by localhost (service2.sh.cvut.cz [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 16584-02 for ; Tue, 8 Sep 2009 21:06:00 +0200 (CEST) Received: from mykubuntu.localnet (unknown [IPv6:2001:718:2:91:216:d4ff:fe57:5222]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by service2.sh.cvut.cz (Postfix) with ESMTP id 8FFE23BE2F for ; Tue, 8 Sep 2009 21:06:00 +0200 (CEST) From: =?utf-8?q?Luk=C3=A1=C5=A1_Karas?= To: linux-media@vger.kernel.org Subject: Re: [PATCH] fix saa7134-input.c for IR controller over i2c Date: Tue, 8 Sep 2009 21:05:59 +0200 References: <200909081159.58745.lukas.karas@centrum.cz> In-Reply-To: <200909081159.58745.lukas.karas@centrum.cz> MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 8BIT Message-Id: <200909082105.59844.lukas.karas@centrum.cz> Sender: linux-media-owner@vger.kernel.org List-ID: This bug is already fixed by http://linuxtv.org/hg/v4l-dvb/rev/6c42e27832a2 Thank to Mauro Dne Út 8. září 2009 11:59:58 Lukáš Karas napsal(a): > Hi All, > I have DVB card with IR controller connected over i2c bus (this card is > supported by module saa7134). This IR controller work mostly fine, bud when > I execute > rmmod ir-kbd-i2c and modprobe ir-kbd-i2c again, IR controller stops > working. I found problem in aa7134-input.c, metod saa7134_probe_i2c_ir. > > Please, see this: > > struct IR_i2c_init_data init_data; // inicialize init_data as local > variable ... > info.platform_data = &init_data; // put pointer to local variable to > // platform_data > ... > i2c_new_device(&dev->i2c_adap, &info); // publish this for other modules > ... > } // end of function, so kernel can use memory used for local variable > again > > Here is my patch for fix this problem: > > Signed-off-by: Lukas Karas > --- ./video.2b49813f8482/saa7134/saa7134-input.c 2009-09-03 > 12:06:34.000000000 +0200 > +++ video/saa7134/saa7134-input.c 2009-09-07 00:51:46.000000000 +0200 > @@ -742,7 +808,7 @@ void saa7134_probe_i2c_ir(struct saa7134 > { > #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) > struct i2c_board_info info; > - struct IR_i2c_init_data init_data; > + struct IR_i2c_init_data *init_data; > const unsigned short addr_list[] = { > 0x7a, 0x47, 0x71, 0x2d, > I2C_CLIENT_END > @@ -770,7 +836,8 @@ void saa7134_probe_i2c_ir(struct saa7134 > > #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) > memset(&info, 0, sizeof(struct i2c_board_info)); > - memset(&init_data, 0, sizeof(struct IR_i2c_init_data)); > + init_data = kzalloc(sizeof(struct IR_i2c_init_data), GFP_KERNEL); > strlcpy(info.type, "ir_video", I2C_NAME_SIZE); > > #endif > @@ -780,15 +847,15 @@ void saa7134_probe_i2c_ir(struct saa7134 > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) > snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV"); > #else > - init_data.name = "Pinnacle PCTV"; > + init_data->name = "Pinnacle PCTV"; > #endif > if (pinnacle_remote == 0) { > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) > ir->get_key = get_key_pinnacle_color; > ir->ir_codes = &ir_codes_pinnacle_color_table; > #else > - init_data.get_key = get_key_pinnacle_color; > - init_data.ir_codes = &ir_codes_pinnacle_color_table; > + init_data->get_key = get_key_pinnacle_color; > + init_data->ir_codes = &ir_codes_pinnacle_color_table; > info.addr = 0x47; > #endif > } else { > @@ -796,8 +863,8 @@ void saa7134_probe_i2c_ir(struct saa7134 > ir->get_key = get_key_pinnacle_grey; > ir->ir_codes = &ir_codes_pinnacle_grey_table; > #else > - init_data.get_key = get_key_pinnacle_grey; > - init_data.ir_codes = &ir_codes_pinnacle_grey_table; > + init_data->get_key = get_key_pinnacle_grey; > + init_data->ir_codes = &ir_codes_pinnacle_grey_table; > info.addr = 0x47; > #endif > } > @@ -808,9 +875,9 @@ void saa7134_probe_i2c_ir(struct saa7134 > ir->get_key = get_key_purpletv; > ir->ir_codes = &ir_codes_purpletv_table; > #else > - init_data.name = "Purple TV"; > - init_data.get_key = get_key_purpletv; > - init_data.ir_codes = &ir_codes_purpletv_table; > + init_data->name = "Purple TV"; > + init_data->get_key = get_key_purpletv; > + init_data->ir_codes = &ir_codes_purpletv_table; > #endif > break; > case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: > @@ -819,9 +886,9 @@ void saa7134_probe_i2c_ir(struct saa7134 > ir->get_key = get_key_msi_tvanywhere_plus; > ir->ir_codes = &ir_codes_msi_tvanywhere_plus_table; > #else > - init_data.name = "MSI TV@nywhere Plus"; > - init_data.get_key = get_key_msi_tvanywhere_plus; > - init_data.ir_codes = &ir_codes_msi_tvanywhere_plus_table; > + init_data->name = "MSI TV@nywhere Plus"; > + init_data->get_key = get_key_msi_tvanywhere_plus; > + init_data->ir_codes = &ir_codes_msi_tvanywhere_plus_table; > info.addr = 0x30; > /* MSI TV@nywhere Plus controller doesn't seem to > respond to probes unless we read something from > @@ -839,9 +906,9 @@ void saa7134_probe_i2c_ir(struct saa7134 > ir->get_key = get_key_hvr1110; > ir->ir_codes = &ir_codes_hauppauge_new_table; > #else > - init_data.name = "HVR 1110"; > - init_data.get_key = get_key_hvr1110; > - init_data.ir_codes = &ir_codes_hauppauge_new_table; > + init_data->name = "HVR 1110"; > + init_data->get_key = get_key_hvr1110; > + init_data->ir_codes = &ir_codes_hauppauge_new_table; > #endif > break; > case SAA7134_BOARD_BEHOLD_607FM_MK3: > @@ -862,9 +929,21 @@ void saa7134_probe_i2c_ir(struct saa7134 > ir->get_key = get_key_beholdm6xx; > ir->ir_codes = &ir_codes_behold_table; > #else > - init_data.name = "BeholdTV"; > - init_data.get_key = get_key_beholdm6xx; > - init_data.ir_codes = &ir_codes_behold_table; > + init_data->name = "BeholdTV"; > + init_data->get_key = get_key_beholdm6xx; > + init_data->ir_codes = &ir_codes_behold_table; > #endif > break; > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) > @@ -879,8 +958,9 @@ void saa7134_probe_i2c_ir(struct saa7134 > } > > #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) > - if (init_data.name) > - info.platform_data = &init_data; > + if (init_data->name) > + info.platform_data = init_data; > /* No need to probe if address is known */ > if (info.addr) { > i2c_new_device(&dev->i2c_adap, &info); > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >