From: Wolfgang Denk Date: Tue, 15 Sep 2009 10:41:29 +0200 Subject: [U-Boot] [PATCH] Enable usb ehci support for p2020ds board In-Reply-To: <4AAF46B4.7030603@embedded-sol.com> References: <1252565088.22292.1.camel@rock.ap.freescale.net><4AACB8FD.2040604@embedded-sol.com><7DF0AF56456B8F4081E3C44CCCE311DE5A366C@zch01exm23.fsl.freescale.net> <4AADF597.1010308@embedded-sol.com> <73839B4A0818E747864426270AC332C304512FE2@zmy16exm20.fsl.freescale.net> <4AAF46B4.7030603@embedded-sol.com> Message-ID: <20090915084129.75FDC832E864@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Felix Radensky, In message <4AAF46B4.7030603@embedded-sol.com> you wrote: > Hu Mingkai-B21284 wrote: [Full quote deleted] Hey, eveybody on this thread: could you *please* stop full-quoting? Please read http://www.netmeister.org/news/learn2quote.html ... > I've tested another USB stick with this board, and was recognized properly. > Also, the problematic stick works fine with Linux, so I still suspect > there's a > problem in u-boot EHCI driver. Can you test your board with smaller/older > devices, the one that has problems is 512MB Sandisk Cruizer Mini. Is there any chance that this non-working stick is not a high-speed device? Eventually this EHCI driver has problems with full-speed (or low-speed) devices? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What's the sound a name makes when it's dropped?