From: Wolfgang Denk Date: Thu, 17 Sep 2009 09:43:33 +0200 Subject: [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S In-Reply-To: <25484494.post@talk.nabble.com> References: <25484494.post@talk.nabble.com> Message-ID: <20090917074333.40D33832E864@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Thomas Jackson, In message <25484494.post@talk.nabble.com> you wrote: > > I understand NOR-based flash memory devices have traditionally been used for > non-volatile storage for a bootloader and other various advantages including > support for execute-in-place code, random access to memory, and zero error > rate, etc. However, we have a project that we would like to have U-Boot > bootloader run via NAND Flash memory device on a ARM926EJ-S based board. I > searched the mailing list for this and didn't see anything. I only found a I have no idea how you performed that search, but it seems you have a special aptitude to avoid all the obvious hits. > question posted in 2006 where it was asked if the kernel based on ARM926EJ-S > can boot from NAND flash. Which I know is ok. Does the community know of > any existing mechanisms for this type of configuration to enable U-Boot load > and run via NAND flash? It's a standard feature and available on many (most?) boards that support booting from NAND. Dunno if this includes AT91 boards. Jean-Christophe should be able to answer this, but he is currently off this planet. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Anyone can count the seeds in an apple. No one can count the apples in a seed.