From: Tilman Schmidt Subject: [PATCH 03/12] gigaset: linearize skb Date: Sat, 19 Sep 2009 01:57:43 +0200 (CEST) Message-ID: <20090919-patch-gigaset-03.tilman@imap.cc> References: <20090919-patch-gigaset-00.tilman@imap.cc> Cc: Hansjoerg Lipp , davem@davemloft.net, i4ldeveloper@listserv.isdn4linux.de, netdev@vger.kernel.org, linux-kernel@vger.kernel.org To: Karsten Keil , Karsten Keil Return-path: Received: from mail.pxnet.com ([195.227.45.7]:35098 "EHLO mail.pxnet.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754129AbZIRX6o (ORCPT ); Fri, 18 Sep 2009 19:58:44 -0400 In-Reply-To: <20090919-patch-gigaset-00.tilman@imap.cc> Sender: netdev-owner@vger.kernel.org List-ID: The code of the Gigaset driver assumes that sk_buff-s coming from the ISDN4Linux subsystem are always linear. Explicitly calling skb_linearize() is cheap if they are, but much more robust in case they ever aren't. Impact: robustness improvement Signed-off-by: Tilman Schmidt --- drivers/isdn/gigaset/i4l.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c index 9b22f9c..322f16e 100644 --- a/drivers/isdn/gigaset/i4l.c +++ b/drivers/isdn/gigaset/i4l.c @@ -51,6 +51,12 @@ static int writebuf_from_LL(int driverID, int channel, int ack, return -ENODEV; } bcs = &cs->bcs[channel]; + + /* can only handle linear sk_buffs */ + if (skb_linearize(skb) < 0) { + dev_err(cs->dev, "%s: skb_linearize failed\n", __func__); + return -ENOMEM; + } len = skb->len; gig_dbg(DEBUG_LLDATA, -- 1.6.2.1.214.ge986c