From: akpm@linux-foundation.org Subject: [patch 090/232] mmc_spi: fail gracefully if host or card do not support the switch command Date: Tue, 22 Sep 2009 16:45:26 -0700 Message-ID: <200909222345.n8MNjQuA014339@imap1.linux-foundation.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Return-path: Received: from smtp1.linux-foundation.org ([140.211.169.13]:54226 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753381AbZIVXrL (ORCPT ); Tue, 22 Sep 2009 19:47:11 -0400 Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: torvalds@linux-foundation.org Cc: akpm@linux-foundation.org, wolfgang.mues@auerswald.de, linux-mmc@vger.kernel.org, stable@kernel.org From: Wolfgang Muees Some time ago, I have send a patch to the mmc_spi subsystem changing the error codes. This was after a discussion with Pierre about using EINVAL only for non-recoverable errors. This patch was accepted as http://git.kernel.org/linus/fdd858db7113ca64132de390188d7ca00701013d Unfortunately, several weeks later, I realized that this patch has opened a little can of worms because there are SD cards on the market which a) claim that they support the switch command AND b) refuse to execute this command if operating in SPI mode. So, such a card would get unusuable in an embedded linux system in SPI mode, because the init sequence terminates with an error. This patch adds the missing error codes to the caller of the switch command and restores the old behaviour to fail gracefully if these commands can not execute. Signed-off-by: Wolfgang Muees Cc: Cc: [2.6.31.x] Signed-off-by: Andrew Morton --- drivers/mmc/core/mmc.c | 10 +++++----- drivers/mmc/core/sd.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff -puN drivers/mmc/core/mmc.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command drivers/mmc/core/mmc.c --- a/drivers/mmc/core/mmc.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command +++ a/drivers/mmc/core/mmc.c @@ -179,11 +179,11 @@ static int mmc_read_ext_csd(struct mmc_c err = mmc_send_ext_csd(card, ext_csd); if (err) { - /* - * We all hosts that cannot perform the command - * to fail more gracefully - */ - if (err != -EINVAL) + /* If the host or the card can't do the switch, + * fail more gracefully. */ + if ((err != -EINVAL) + && (err != -ENOSYS) + && (err != -EFAULT)) goto out; /* diff -puN drivers/mmc/core/sd.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command drivers/mmc/core/sd.c --- a/drivers/mmc/core/sd.c~mmc_spi-fail-gracefully-if-host-or-card-do-not-support-the-switch-command +++ a/drivers/mmc/core/sd.c @@ -210,11 +210,11 @@ static int mmc_read_switch(struct mmc_ca err = mmc_sd_switch(card, 0, 0, 1, status); if (err) { - /* - * We all hosts that cannot perform the command - * to fail more gracefully - */ - if (err != -EINVAL) + /* If the host or the card can't do the switch, + * fail more gracefully. */ + if ((err != -EINVAL) + && (err != -ENOSYS) + && (err != -EFAULT)) goto out; printk(KERN_WARNING "%s: problem reading switch " _