From: Wolfgang Denk Date: Sat, 03 Oct 2009 00:09:51 +0200 Subject: [U-Boot] Preserving frame buffer memory between uboot and Linux In-Reply-To: <25722060.post@talk.nabble.com> References: <25722060.post@talk.nabble.com> Message-ID: <20091002220952.01285832E408@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Steven Zedeck, In message <25722060.post@talk.nabble.com> you wrote: > > We have a situation when we want to display an image towards the end of > Uboot's execution, before we boot Linux. I have that already. > > However, my issue is that while Linux boots it mallocs a new frame buffer > and reinitializes the LCD controller with a new memory address. At the > moment in Uboot the frame buffer is at 0x23F39000. In Linux I see it being > mapped to 0x23980000. > > Is there a way to force Linux to use the already-allocated frame buffer > memory so the image doesn't go away? In mainline: not, or not yet at least. In our linux-2.6-denx repo you can find these commits: commit 01baab26e52bc66cb1781ab970fba932b592f2ee Author: Anatolij Gustschin Date: Wed May 28 23:45:21 2008 +0200 Fix to enable console cursor drawing capability if CONFIG_FB_PRE_INIT_FB defined Background: By defining the CONFIG_FB_PRE_INIT_FB option in the Linux kernel configuration the framebuffer state set by the boot loader before booting the Linux kernel will be preserved in order to avoid display flicker and splash screen destruction. To ensure this, this option also disabled framebuffer console cursor drawing capability entirely. This was pretty invasive restriction and didn't allow using console cursor drawing later in applications which need the visible cursor. Now this patch is introduced to get rid of this restriction. If CONFIG_FB_PRE_INIT_FB is defined in the Linux kernel configuration, the framebuffer state will still be preserved (as set by the boot loader) and also framebuffer console cursor drawing will be disabled. If an application needs visible cursor, it should enable cursor drawing by writing escape sequence ESC[?25h to the console device. E.g. echo -e "\33[?25h" > /dev/tty0 Signed-off-by: Anatolij Gustschin ... commit 6c3b5cdbc84b43190996124debc8fb29c9bf90ed Author: Anatolij Gustschin Date: Tue Jan 15 00:28:23 2008 +0100 Add CONFIG_FB_PRE_INIT_FB option CONFIG_FB_PRE_INIT_FB option allows to inherit display controller configuration and framebuffer contents from the state set by the bootloader. Signed-off-by: Anatolij Gustschin They do exactly what you are looking for. I remember that someone tried to clean this up and poush it into mainline, but IIRC this attempt failed because the PTB considered this an exotic requirement from those insane embedded folks which was not needed on any real systems. > I am running on an Atmel AT91SAM9RL with Uboot 2008.10 and 2.6.28 Linux. Hope this helps. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Four thousand throats may be cut in one night by a running man. -- Klingon Soldier, "Day of the Dove", stardate unknown