From: jbe@pengutronix.de (Juergen Beisert) Date: Thu, 15 Oct 2009 20:14:50 +0200 Subject: S3C2440: SD-Card access fails Message-ID: <200910152014.50677.jbe@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi list, I'm using an S3C2440 based custom made board with a 2.6.31.3 kernel (with a few modifications to add the boards specific file). When I do some traffic on the SD card (1GiB SD type), for example untaring an archive I get a failure like this one: Unable to handle kernel paging request at virtual address 4b856104 pgd = c0004000 [4b856104] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.31.3jbe #6) PC is at s3c2410_gpio_getpin+0x18/0x2c LR is at s3cmci_card_present+0x28/0x44 pc : [] lr : [] psr: a0000013 sp : c1db9df8 ip : c1db9e08 fp : c1db9e04 r10: c1d33ae4 r9 : c1db9e78 r8 : 00000001 r7 : c1d61e00 r6 : c1db9e78 r5 : c1c3b000 r4 : c001d8d8 r3 : 4b856100 r2 : c1db9eb8 r1 : c1db9e78 r0 : a10ac21a Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c000717f Table: 3034c000 DAC: 00000017 Process mmcqd (pid: 375, stack limit = 0xc1db8270) Stack: (0xc1db9df8 to 0xc1dba000) 9de0: c1db9e1c c1db9e08 9e00: c0199290 c002cf08 c1d33ae4 c1c3b140 c1db9e3c c1db9e20 c0199960 c0199278 9e20: c1d33ae4 c1db9e78 c1c3b000 c1d26708 c1db9e64 c1db9e40 c0190418 c019993c 9e40: c0196718 00000000 c1db9e48 c1db9e48 c1d26708 c1d33ae4 c1db9f94 c1db9e68 9e60: c01962b8 c019031c c02c01c0 c02c0100 c1db9e8c 00000000 c1db9e8c c1db9ee4 9e80: c1db9eb8 c1db9e44 c01904a8 00000012 08074600 00000000 00000000 00000000 9ea0: 00000000 000000b5 00000000 00000000 c1db9ee4 c1db9e78 0000000c 00000000 9ec0: 00000000 00000000 00000000 00000000 0000049d 00000000 00000000 00000000 9ee0: c1db9e78 05f5e100 00000000 00000200 00000008 00000000 00000200 00000000 9f00: c1db9eb8 c1db9e78 00000001 c1ceb800 c1c3d830 c1daac00 c1db9f44 c1db9f28 9f20: c1c6e01c c1daac00 00000017 c1daac00 00000000 c1d34438 00000000 c1d34438 9f40: 00000000 c1db9f5c c1db9f7c c1db9f58 c0115740 c1d26708 c1db9f7c c1db9f68 9f60: c0114ea4 c0119fcc c1db8000 c1d26708 c1d33ae4 c1db8000 c1d33aec c1d34438 9f80: 00000000 c1d34540 c1db9fc4 c1db9f98 c0196b50 c01960f4 c1db9fc4 c1db9fcc 9fa0: c1c3fd3c c1d33ae4 c0196a68 00000000 00000000 00000000 c1db9ff4 c1db9fc8 9fc0: c0048cb4 c0196a78 00000000 00000000 c1db9fd0 c1db9fd0 00000000 00000000 9fe0: 00000000 00000000 00000000 c1db9ff8 c00386e8 c0048c40 00000000 00000000 Backtrace: [] (s3c2410_gpio_getpin+0x0/0x2c) from [] (s3cmci_card_present+0x28/0x44) [] (s3cmci_card_present+0x0/0x44) from [] (s3cmci_request+0x34/0x6c) r4:c1c3b140 [] (s3cmci_request+0x0/0x6c) from [] (mmc_wait_for_req+0x10c/0x124) r6:c1d26708 r5:c1c3b000 r4:c1db9e78 [] (mmc_wait_for_req+0x0/0x124) from [] (mmc_blk_issue_rq+0x1d4/0x550) r5:c1d33ae4 r4:c1d26708 [] (mmc_blk_issue_rq+0x0/0x550) from [] (mmc_queue_thread+0xe8/0xec) [] (mmc_queue_thread+0x0/0xec) from [] (kthread+0x84/0x8c) [] (kthread+0x0/0x8c) from [] (do_exit+0x0/0x21c) r7:00000000 r6:00000000 r5:00000000 r4:00000000 Code: e24cb004 e3c0301f e1a030a3 e28334fb (e5933004) ---[ end trace 969be95693003e89 ]--- This failure at adress 0xc002cf10 is the last line in function s3c2410_gpio_getpin in arch/arm/plat-s3c24xx/gpio.c: return __raw_readl(base + 0x04) & (1<< offs); But it doesn't fails always at this location. I saw various location when I try to find the cause of the failure. Another failure was: mmc0: card b368 removed Unable to handle kernel paging request at virtual address 00001000 pgd = c0004000 [00001000] *pgd=00000000 Internal error: Oops: 0 [#1] Modules linked in: CPU: 0 Not tainted (2.6.31.3jbe #4) PC is at 0x1000 LR is@s3cmci_set_ios+0xf0/0x1f0 pc : [<00001000>] lr : [] psr: 20000013 [...] Backtrace: [] (s3cmci_set_ios+0x0/0x1f0) from [] (mmc_power_off+0x54/0x58) [] (mmc_power_off+0x0/0x58) from [] (mmc_detach_bus+0x6c/0xcc) [] (mmc_detach_bus+0x0/0xcc) from [] (mmc_sd_detect+0x78/0x8c) [...] But: It does not happen immediately when the traffic starts. It always happens a few seconds after the traffic starts. And it fails more often when I run a kernel with CONFIG_KALLSYMS=n instead of =y. And currently the system only fails if I use the SD card. While running from NFS root and doing some action in the system it seems to run stable. Any idea what is going on here? Regards, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ |