From: Mike Frysinger Date: Mon, 26 Oct 2009 16:50:14 -0400 Subject: [U-Boot] replacing do_reset with a custom one In-Reply-To: <4AE5EE0C.2060501@RuggedCom.com> References: <4AE22376.5050107@RuggedCom.com> <200910240219.26063.vapier@gentoo.org> <4AE5EE0C.2060501@RuggedCom.com> Message-ID: <200910261650.14911.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 26 October 2009 14:44:28 Richard Retanubun wrote: > Mike Frysinger wrote: > > #ifdef's are the past. weaks are in! > > > > the Blackfin port already does: > > void board_reset(void) __attribute__((__weak__)); > > ... > > if (board_reset) > > board_reset(); > > ... > > > > the bf537-stamp uses this to make sure some pins are driven low to > > workaround weak pull ups in the hardware > > Thanks for the tip Mike! I've submitted patches for MPC83xx and MCF5271 > architectures. They lack cpu.h file though, so I made one, let's see what > the maintainers says. it would probably make sense to move the prototype to the common files where do_reset() is defined ... -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20091026/326c9c34/attachment.pgp