From: Shawn Starr Subject: Conexant CX20561 - Microphone problems Date: Thu, 29 Oct 2009 18:59:40 -0400 Message-ID: <200910291859.41076.shawn.starr@rogers.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp108.rog.mail.re2.yahoo.com (smtp108.rog.mail.re2.yahoo.com [68.142.225.206]) by alsa0.perex.cz (Postfix) with SMTP id 1D076103826 for ; Thu, 29 Oct 2009 23:59:45 +0100 (CET) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Hello ALSA developers, I am having problems with the microphone on the following hardware this is on a Lenovo W500 laptop. Card: HDA Intel Chip: Conexant CX20561 (Hermosa) Here is the problems im noticing: 1) If I use ALSA 'default' with the microphone I get noise interference on output [high/low/high/low]. If I switch this to use the "ALSA Capture on HDA Intel [CONEXANT Analog] I get interference except it is the standard 60Hz electrical noise [steady noise] 2) Using the internal/external microphones gives an inconsistent volume. It also does not seem to work with the microphone cutting out so much. I need to adjust Digital + another microphone but it still drops capturing. Alsamixer shows: Digital/Docking Microphone/External Microphone/Internal Microphone Here is the module options I give to the sound driver: options snd-intel-hda enable_msi=1 power_save=10 power_save_controller=true model=laptop index=0 Assuming power saving/controller causes the microphone to cut out or not. 3) I'm now aware that this card has no pinouts for PCM capture https://bugzilla.redhat.com/show_bug.cgi?id=502293 Thanks for any help, Shawn.