From: Wolfgang Denk Date: Sat, 31 Oct 2009 16:15:00 +0100 Subject: [U-Boot] [PATCH v2 4/4] mpc52xx: add support for the IPEK01 board In-Reply-To: <1256292196-20660-5-git-send-email-wg@grandegger.com> References: <1256292196-20660-1-git-send-email-wg@grandegger.com> <1256292196-20660-2-git-send-email-wg@grandegger.com> <1256292196-20660-3-git-send-email-wg@grandegger.com> <1256292196-20660-4-git-send-email-wg@grandegger.com> <1256292196-20660-5-git-send-email-wg@grandegger.com> Message-ID: <20091031151500.3ECA5C88C7@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang Grandegger, In message <1256292196-20660-5-git-send-email-wg@grandegger.com> you wrote: > From: Wolfgang Grandegger > > This patch adds support for the board IPEK01 based on the MPC5200. > The Futjitsu Lime graphics controller is configured in 16 bpp mode. > > Signed-off-by: Wolfgang Grandegger > --- > MAINTAINERS | 2 + > MAKEALL | 1 + > Makefile | 3 + > board/ipek01/Makefile | 50 ++++++ > board/ipek01/config.mk | 30 ++++ > board/ipek01/ipek01.c | 282 ++++++++++++++++++++++++++++++++ > include/configs/ipek01.h | 408 ++++++++++++++++++++++++++++++++++++++++++++++ > 7 files changed, 776 insertions(+), 0 deletions(-) > create mode 100644 board/ipek01/Makefile > create mode 100644 board/ipek01/config.mk > create mode 100644 board/ipek01/ipek01.c > create mode 100644 include/configs/ipek01.h Applied to "next" branch, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de To be a winner, all you need to give is all you have.