From: tbm@cyrius.com (Martin Michlmayr) Date: Thu, 5 Nov 2009 18:09:01 +0000 Subject: [PATCH] Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x Message-ID: <20091105180901.GA10037@deprecation.cyrius.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org MPP36 is used on the QNAP TS-11x/TS-21x devices to indicate how much RAM there is: it's high for 512 MB RAM (TS-x19) and low for 256 MB (TS-x10). While this may not be very useful, let's add it for completeness. Signed-off-by: Martin Michlmayr diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index ec1a64f..cb0f56d 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -152,6 +152,7 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ 0 }; -- Martin Michlmayr http://www.cyrius.com/