From: simon.kagstrom@netinsight.net (Simon Kagstrom) Date: Mon, 9 Nov 2009 09:49:58 +0100 Subject: orion/kirkwood pcie issue still open with rc6 In-Reply-To: <200911090933.46240.dk-arm-linux@gmx.de> References: <200911090933.46240.dk-arm-linux@gmx.de> Message-ID: <20091109094958.4ba72970@marrow.netinsight.se> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, 9 Nov 2009 09:33:46 +0100 Dieter Kiermaier wrote: > Ronan Shitrit from marvell gave me the information to clear bit 2 of physical > address 0xf1020100 to enable bus scanning. > I don't know what this really does but it helped to get my kernel up and running. You have that in the functional specification for the kirkwood processors: http://www.marvell.com/files/products/embedded_processors/kirkwood/FS_88F6180_9x_6281_OpenSource.pdf See Appendix A for the register set and lookup address 0x20100 (the CPU configuration register). Bit 2 in that register turns on/off error propagation: Mbus-L Error propogation For a list of errors see "Error Handling". 0 = NoErrProp: Error indications are not propagated to Mbus-L. The transactions are completed normally. 1 = ErrProp: Error indications are propagated to Mbus-L. and clearing it sounds quite a bit like hiding the real problem :-). Probably it's best to try to find out what's causing this error (see the Error Handling section of the PCIe chapter in the reference manual above) so that that a proper fix can be implemented! // Simon