From: Fred Labrosse Subject: multiple APIC/MADT found Date: Fri, 13 Nov 2009 13:38:38 +0000 Message-ID: <200911131338.38528.ffl@aber.ac.uk> Mime-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from braint.aber.ac.uk ([144.124.16.42]:37606 "EHLO braint.aber.ac.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752635AbZKMNuS (ORCPT ); Fri, 13 Nov 2009 08:50:18 -0500 Received: from pcffl.dcs.aber.ac.uk ([193.60.10.49] helo=aber.ac.uk) by braint.aber.ac.uk with esmtp (Exim 4.69) (envelope-from ) id 1N8wMI-0002c5-5q for linux-acpi@vger.kernel.org; Fri, 13 Nov 2009 13:38:38 +0000 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org Hi, At some point, I discovered that I only had one processor active on my laptop (A VAIO VGN-SZ2M) wich has a centrino duo in (2 cores). I then discovered in dmesg the lines that say: ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux- acpi@vger.kernel.org So I did that (acpi_apic_instance=2) and that did give me 2 processors. Which is definitely better, hence my email to the suggested address. There is one thing that does not quite work however and I don't know if this is related: ACPI only sees one processor and therefore cpufreq only controls the frequency of one processor. I think this used to work but I don't know when that stopped. Hee's the output of uname: # uname -a Linux pcp2ffl 2.6.30-gentoo-r8 #4 SMP PREEMPT Thu Nov 12 18:41:51 GMT 2009 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux I have tried with a vanilla kernel too but that made no difference. Hope this helps. Fred