From: Benjamin Herrenschmidt Subject: [PATCH 2/5] powerpc/macio: Add dma_parms support to macio Date: Wed, 02 Dec 2009 11:36:27 +1100 Message-ID: <20091202003628.197401007D3@ozlabs.org> Return-path: Received: from ozlabs.org ([203.10.76.45]:50176 "EHLO ozlabs.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754748AbZLBAgW (ORCPT ); Tue, 1 Dec 2009 19:36:22 -0500 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org, jeff@garzik.org, tj@kernel.org This adds dma_parms to macio devices and initializes them with default values. This will allow pata_macio to setup the appropriate max segment size for the block layer. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/macio.h | 1 + drivers/macintosh/macio_asic.c | 5 +++++ 2 files changed, 6 insertions(+) --- linux-work.orig/arch/powerpc/include/asm/macio.h 2009-11-27 14:38:05.000000000 +1100 +++ linux-work/arch/powerpc/include/asm/macio.h 2009-11-27 14:38:20.000000000 +1100 @@ -39,6 +39,7 @@ struct macio_dev struct macio_bus *bus; /* macio bus this device is on */ struct macio_dev *media_bay; /* Device is part of a media bay */ struct of_device ofdev; + struct device_dma_parameters dma_parms; /* ide needs that */ int n_resources; struct resource resource[MACIO_DEV_COUNT_RESOURCES]; int n_interrupts; Index: linux-work/drivers/macintosh/macio_asic.c =================================================================== --- linux-work.orig/drivers/macintosh/macio_asic.c 2009-11-27 14:39:24.000000000 +1100 +++ linux-work/drivers/macintosh/macio_asic.c 2009-11-27 16:37:39.000000000 +1100 @@ -379,6 +379,11 @@ static struct macio_dev * macio_add_one_ dev->ofdev.dev.parent = parent; dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; + dev->ofdev.dev.dma_parms = &dev->dma_parms; + + /* Standard DMA paremeters */ + dma_set_max_seg_size(&dev->ofdev.dev, 65536); + dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff); #ifdef CONFIG_PCI /* Set the DMA ops to the ones from the PCI device, this could be