From: Matthew Garrett Date: Fri, 11 Dec 2009 16:33:28 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: Add driver for intel PCI Message-Id: <20091211163328.GA1596@srcf.ucam.org> List-Id: References: <1260546750-6206-1-git-send-email-mjg@redhat.com> <68676e00912110828q26e511edt52546f09490c9431@mail.gmail.com> In-Reply-To: <68676e00912110828q26e511edt52546f09490c9431@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Luca Tettamanti Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org On Fri, Dec 11, 2009 at 05:28:37PM +0100, Luca Tettamanti wrote: > On Fri, Dec 11, 2009 at 4:52 PM, Matthew Garrett wrote: > > Recent Intel chipsets have support for a PCI device providing access > > to on-board thermal monitoring. Previous versions have merely used this > > to allow the BIOS to set trip points, but Ibex Peak documents a set of > > registers to read values. This driver implements an hwmon interface to > > read them. > > Does it plays nice with other drivers? > More specifically: is it possible to load the native driver and this > one (which I presume pokes at the same chip) at the same time? What do you mean by native driver? This is a native driver for the chip in question. -- Matthew Garrett | mjg59@srcf.ucam.org _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors