From: Matthew Garrett Date: Fri, 11 Dec 2009 16:50:04 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: Add driver for intel PCI Message-Id: <20091211165004.GA2156@srcf.ucam.org> List-Id: References: <1260546750-6206-1-git-send-email-mjg@redhat.com> <68676e00912110828q26e511edt52546f09490c9431@mail.gmail.com> <20091211163328.GA1596@srcf.ucam.org> <68676e00912110836p278985cfv3d052e16a22916b1@mail.gmail.com> <20091211163822.GA1869@srcf.ucam.org> <68676e00912110847o3594931etf6e045340043e2c6@mail.gmail.com> In-Reply-To: <68676e00912110847o3594931etf6e045340043e2c6@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Luca Tettamanti Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org On Fri, Dec 11, 2009 at 05:47:29PM +0100, Luca Tettamanti wrote: > Sorry, I think we're not understanding each other :) > Does the PCH samples the values directly from the probes? Or is it an > interface for the real monitoring chip (most likely the superio chip)? > In the latter case it might be possible to access directly the > monitoring hardware using another driver (e.g. w83627ehf, lm80, etc.), > thus racing against the PCI driver. > Did I make myself clear? I don't think there's any other chip. On systems using external chips, this PCI device will simply be disabled by the BIOS before the OS boots. -- Matthew Garrett | mjg59@srcf.ucam.org _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors