From: s.hauer@pengutronix.de (Sascha Hauer) Date: Mon, 14 Dec 2009 11:33:48 +0100 Subject: [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS) In-Reply-To: References: Message-ID: <20091214103348.GV15126@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Dec 14, 2009 at 12:19:41PM +0200, Baruch Siach wrote: > The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds the > necessary bits to make the i.MX25 talk RMII. > > Signed-off-by: Baruch Siach > --- > drivers/net/fec.c | 22 ++++++++++++++++++++++ > drivers/net/fec.h | 2 ++ > 2 files changed, 24 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/fec.c b/drivers/net/fec.c > index 16a1d58..65c43d3 100644 > --- a/drivers/net/fec.c > +++ b/drivers/net/fec.c > @@ -51,6 +51,7 @@ > #include "fec.h" > > #ifdef CONFIG_ARCH_MXC > +#include > #include > #define FEC_ALIGNMENT 0xf > #else > @@ -1722,6 +1723,25 @@ static int fec_enet_init(struct net_device *dev, int index) > return 0; > } > > +static void fec_localhw_setup(struct net_device *dev) > +{ > + struct fec_enet_private *fep = netdev_priv(dev); > + > + if (!machine_is_mx25_3ds()) > + return; We should add a flag in platform data for this. Unfortunately the fec driver has no platform data at all at the moment, so this requires some more work. Sascha > + > + /* disable the gasket and wait */ > + writel(0, fep->hwp + FEC_MIIGSK_ENR); > + while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) > + udelay(1); > + > + /* configure the gasket for RMII, 50 MHz, no loopback, no echo */ > + writel(1, fep->hwp + FEC_MIIGSK_CFGR); > + > + /* re-enable the gasket */ > + writel(2, fep->hwp + FEC_MIIGSK_ENR); > +} > + > /* This function is called to start or restart the FEC during a link > * change. This only happens when switching between half and full > * duplex. > @@ -1810,6 +1830,8 @@ fec_restart(struct net_device *dev, int duplex) > /* Set MII speed */ > writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); > > + fec_localhw_setup(dev); > + > /* And last, enable the transmit and receive processing */ > writel(2, fep->hwp + FEC_ECNTRL); > writel(0, fep->hwp + FEC_R_DES_ACTIVE); > diff --git a/drivers/net/fec.h b/drivers/net/fec.h > index cc47f3f..2c48b25 100644 > --- a/drivers/net/fec.h > +++ b/drivers/net/fec.h > @@ -43,6 +43,8 @@ > #define FEC_R_DES_START 0x180 /* Receive descriptor ring */ > #define FEC_X_DES_START 0x184 /* Transmit descriptor ring */ > #define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */ > +#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */ > +#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */ > > #else > > -- > 1.6.5 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |