From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Wed, 16 Dec 2009 19:52:48 +0100 Subject: [PATCH 00/20] imx cleanup series Message-ID: <20091216185046.GA16984@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello, this series is the next step of a big cleanup of arch-mx* + plat-mxc. The patch by Wolfgang Denk is included because otherwise it would conflict with the series. diffstat and shortlog are below. I think I will add some more patches until the next merge window opens, I send now to get some feedback and make people aware of these changes. Note that the branch may change in a non-fast-forward manner. Best regards Uwe The following changes since commit 8bea8672edfca7ec5f661cafb218f1205863b343: Stephen Rothwell (1): mfd: compile fix for twl4030 renaming are available in the git repository at: git://git.pengutronix.de/git/ukl/linux-2.6.git imx Uwe Kleine-K?nig (19): imx/mx2: fold crm_regs.h into its only consumer imx/clock-imx21: use a macro to define registers imx/clock-imx27: use a macro to define registers imx/mach-mx2: use constants namespaced by the corresponding SOC (easy part) imx/mach-mx3: use constants namespaced by the corresponding SOC (easy part) imx/mx3: rename clock.c and iomux.c to {clock,iomux}-imx31.c imx/mx1: add newline at end of Makefile imx/mx1: rename files defining a machine to mach-$mach.c imx: rename Kconfig symbol for "Eukrea CPUIMX27 module" imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform" imx/mx2: rename files defining a machine to mach-$mach.c imx/mx3: rename files defining a machine to mach-$mach.c imx: provide helper macro to define IO_ADDRESS imx21: define and use MX21_IO_ADDRESS imx27: define and use MX27_IO_ADDRESS imx31: define and use MX31_IO_ADDRESS imx25: redefine MX25_IO_ADDRESS using IMX_IO_ADDRESS imx35: define and use MX35_IO_ADDRESS mx3/kzm_arm11_01: define and use board specific IO_ADDRESS macro Wolfgang Denk (1): ARM: MX3: make CPU revision number detection work on all boards arch/arm/configs/mx27_defconfig | 2 +- arch/arm/mach-mx1/Makefile | 4 +- arch/arm/mach-mx1/{mx1ads.c => mach-mx1ads.c} | 2 +- arch/arm/mach-mx1/{scb9328.c => mach-scb9328.c} | 2 +- arch/arm/mach-mx2/Kconfig | 8 +- arch/arm/mach-mx2/Makefile | 17 +- arch/arm/mach-mx2/clock_imx21.c | 236 ++++++++++++++++++- arch/arm/mach-mx2/clock_imx27.c | 33 ++-- arch/arm/mach-mx2/cpu_imx27.c | 3 +- arch/arm/mach-mx2/crm_regs.h | 258 -------------------- .../{eukrea_cpuimx27.c => mach-cpuimx27.c} | 12 +- arch/arm/mach-mx2/{mx27lite.c => mach-imx27lite.c} | 4 +- arch/arm/mach-mx2/{mx21ads.c => mach-mx21ads.c} | 10 +- arch/arm/mach-mx2/{mx27pdk.c => mach-mx27_3ds.c} | 4 +- arch/arm/mach-mx2/{mx27ads.c => mach-mx27ads.c} | 6 +- arch/arm/mach-mx2/{mxt_td60.c => mach-mxt_td60.c} | 4 +- arch/arm/mach-mx2/{pca100.c => mach-pca100.c} | 4 +- arch/arm/mach-mx2/{pcm038.c => mach-pcm038.c} | 8 +- arch/arm/mach-mx2/pcm970-baseboard.c | 4 +- arch/arm/mach-mx3/Makefile | 24 +- arch/arm/mach-mx3/{clock.c => clock-imx31.c} | 5 +- arch/arm/mach-mx3/clock-imx35.c | 4 +- arch/arm/mach-mx3/crm_regs.h | 2 +- arch/arm/mach-mx3/{iomux.c => iomux-imx31.c} | 2 +- .../{armadillo5x0.c => mach-armadillo5x0.c} | 12 +- .../mach-mx3/{kzmarm11.c => mach-kzm_arm11_01.c} | 32 ++- arch/arm/mach-mx3/{mx31pdk.c => mach-mx31_3ds.c} | 15 +- arch/arm/mach-mx3/{mx31ads.c => mach-mx31ads.c} | 19 +- .../arm/mach-mx3/{mx31lilly.c => mach-mx31lilly.c} | 8 +- arch/arm/mach-mx3/{mx31lite.c => mach-mx31lite.c} | 19 +- .../mach-mx3/{mx31moboard.c => mach-mx31moboard.c} | 4 +- arch/arm/mach-mx3/{mx35pdk.c => mach-mx35pdk.c} | 4 +- arch/arm/mach-mx3/{pcm037.c => mach-pcm037.c} | 16 +- arch/arm/mach-mx3/{pcm043.c => mach-pcm043.c} | 4 +- arch/arm/mach-mx3/{qong.c => mach-qong.c} | 14 +- arch/arm/mach-mx3/mm.c | 5 + arch/arm/plat-mxc/include/mach/board-mx31ads.h | 2 +- arch/arm/plat-mxc/include/mach/hardware.h | 4 + arch/arm/plat-mxc/include/mach/mx21.h | 7 + arch/arm/plat-mxc/include/mach/mx25.h | 19 +- arch/arm/plat-mxc/include/mach/mx27.h | 7 + arch/arm/plat-mxc/include/mach/mx31.h | 9 + arch/arm/plat-mxc/include/mach/mx35.h | 8 + 43 files changed, 433 insertions(+), 433 deletions(-) rename arch/arm/mach-mx1/{mx1ads.c => mach-mx1ads.c} (98%) rename arch/arm/mach-mx1/{scb9328.c => mach-scb9328.c} (98%) delete mode 100644 arch/arm/mach-mx2/crm_regs.h rename arch/arm/mach-mx2/{eukrea_cpuimx27.c => mach-cpuimx27.c} (94%) rename arch/arm/mach-mx2/{mx27lite.c => mach-imx27lite.c} (96%) rename arch/arm/mach-mx2/{mx21ads.c => mach-mx21ads.c} (96%) rename arch/arm/mach-mx2/{mx27pdk.c => mach-mx27_3ds.c} (96%) rename arch/arm/mach-mx2/{mx27ads.c => mach-mx27ads.c} (98%) rename arch/arm/mach-mx2/{mxt_td60.c => mach-mxt_td60.c} (98%) rename arch/arm/mach-mx2/{pca100.c => mach-pca100.c} (98%) rename arch/arm/mach-mx2/{pcm038.c => mach-pcm038.c} (97%) rename arch/arm/mach-mx3/{clock.c => clock-imx31.c} (99%) rename arch/arm/mach-mx3/{iomux.c => iomux-imx31.c} (98%) rename arch/arm/mach-mx3/{armadillo5x0.c => mach-armadillo5x0.c} (97%) rename arch/arm/mach-mx3/{kzmarm11.c => mach-kzm_arm11_01.c} (89%) rename arch/arm/mach-mx3/{mx31pdk.c => mach-mx31_3ds.c} (95%) rename arch/arm/mach-mx3/{mx31ads.c => mach-mx31ads.c} (96%) rename arch/arm/mach-mx3/{mx31lilly.c => mach-mx31lilly.c} (97%) rename arch/arm/mach-mx3/{mx31lite.c => mach-mx31lite.c} (94%) rename arch/arm/mach-mx3/{mx31moboard.c => mach-mx31moboard.c} (99%) rename arch/arm/mach-mx3/{mx35pdk.c => mach-mx35pdk.c} (97%) rename arch/arm/mach-mx3/{pcm037.c => mach-pcm037.c} (97%) rename arch/arm/mach-mx3/{pcm043.c => mach-pcm043.c} (98%) rename arch/arm/mach-mx3/{qong.c => mach-qong.c} (95%) -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |