From: baruch@tkos.co.il (Baruch Siach) Date: Mon, 21 Dec 2009 08:04:30 +0200 Subject: [PATCH 0/4] mx25: add support for FEC on i.MX25 PDK In-Reply-To: References: Message-ID: <20091221060429.GA3569@jasper.tkos.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Sascha, Ping. Ack/NACK? baruch On Mon, Dec 14, 2009 at 12:19:38PM +0200, Baruch Siach wrote: > This patch series adds support for the FEC peripheral of the i.MX25 on the > i.MX25 PDK board. > > The first two patches are fixes for compilation and run failures. The third > patch enables RMII if the FEC driver. Finally, the last patch adds the > necessary board support code (pads, clock, etc.) > > The FEC fix seems like an ugly hack to me. Suggestions for a better solution > are welcome. > > Baruch Siach (4): > mx25: s/NO_PAD_CTL/NO_PAD_CTRL/ > mx25: don't force input on FEC pins > fec: add support for Freescale i.MX25 PDK (3DS) > mx25: add support for FEC on i.MX25 PDK > > arch/arm/mach-mx25/clock.c | 2 + > arch/arm/mach-mx25/devices.c | 19 ++++++++ > arch/arm/mach-mx25/devices.h | 1 + > arch/arm/mach-mx25/mx25pdk.c | 40 ++++++++++++++++- > arch/arm/plat-mxc/include/mach/iomux-mx25.h | 64 +++++++++++++------------- > arch/arm/plat-mxc/include/mach/mx25.h | 4 ++ > drivers/net/fec.c | 22 +++++++++ > drivers/net/fec.h | 2 + > 8 files changed, 121 insertions(+), 33 deletions(-) -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -